To
Top

HEMEL® Deck Stain

Semi-transparent anti-slip wood stain for decks

  • Semi-transparent
  • Allows wood to breathe
  • High UV resistant
  • Anti-slip features with micro particles
  • Water repellent
  • Lead-free
  • Environmentally friendly
  • Ready to use
113,95-TL /2,5 lt + VAT
Find a Store

General Features:

  • Semi-transparent
  • Allows wood to breathe
  • High UV resistant
  • Anti-slip features with micro particles
  • Water repellent
  • Lead-free
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Decks

Packaging:

  • 2,5 L.
  • 5 L.
  • Antique Pine

    Antique Pine

  • Light

    Light

  • Chestnut

    Chestnut

  • Tanalith Green

    Tanalith Green

  • Teak

    Teak

Important Notice

The colors are applied on pine and are intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture and the absorbency of the wood. Film thickness and the number of coats applied will also affect the end result. To see the final color, it is recommended to apply the coating on the wood to be actually used.

Coverage:

  • 1 L. covers 6-7 m² with 2 coats

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120 or restore wood surface using HEMEL Deck Restorer.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sanding machine.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 5% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by a brush or roller without sanding between coats.
  • Wait 6 hours between coats.
  • Apply in the direction of wood grain to get a homogeneous look.
  • The treated surface may be stepped on 24 hours.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Remove the old paint from the surface completely with a sanding machine.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application”.
  • Inspect annually and maintain as required.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after HEMEL Deck Stain applied surfaces.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying HEMEL Deck Stain.
  • The product should be protected from freezing
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.