To
Top

HEMEL® Teak Oil

Maintenance oil for exterior wood and garden furniture

  • Penetrates deeply
  • Nourishes and revives
  • Easy maintenance
  • Water repellent
  • Salt water resistant
  • Lead-free
  • Ready to use
34,50-TL /0,75 lt+VAT
93,50-TL /2,50 lt+VAT
176,50-TL / 5 lt+VAT


Find a Store

General Features:

  • Penetrates deeply
  • Nourishes and revives
  • Easy maintenance
  • Water repellent
  • Salt water resistant
  • Lead-free
  • Ready to use

Where to Use:

  • For exterior wood and garden furniture
  • Suitable for all exterior wood of boats above the waterline

Packaging:

  • 0,75 L.
  • 2,5 L.
  • 5 L.
  • 15 L.

This product is clear. Therefore, there is no color chart.

Coverage:

  • 1 L. covers 12-15 m² with 1 coat

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120 or restore wood surface using HEMEL Deck Restorer.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use.
  • Apply the product in 1 coat by a brush or cloth and remove the excess oil by cloth for the best result.
  • Wait 24 hours for complete dry.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application”.
  • Maintenance should be repeated every season.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying HEMEL Teak Oil.
  • The product should be stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with mineral spirits after the application.

Safety Precautions:

  • OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.