To
Top

HEMEL® Acrylic Filling Paste

Repair and filling paste used under water and solvent based opaque paints

  • Used to fill smaller openings and capillary cracks like joints and nail heads
  • Fast drying
  • High filling capacity
  • Elastic
  • Easy to sand
  • Rust preventing
  • Successive application in short intervals
  • Ready to use
59,95-TL /1,3 kg + VAT


Find a Store




General Features:

  • Used to fill smaller openings and capillary cracks like joints and nail heads
  • Fast drying
  • High filling capacity
  • Elastic
  • Easy to sand
  • Rust preventing
  • Successive application in short intervals
  • Ready to use

Where to Use:

  • Suitable for all facade wood applications except floors
  • Doors and window joinery
  • Wainscot
  • Cladding
  • Fences
  • Balcony railings
  • Restorations

Packaging:

  • 1,3 Kg
  • White

    White

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.
    • Apply Hickson Decor® Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
    • Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120. Thoroughly clean the generated dust.
    • Apply Hickson Decor Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
    • Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Apply Hickson Decor Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
    • Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.

Application::

  • The product is ready to use.
  • Apply HEMEL Acrylic Filling Paste on previously Hickson Decor® Aqua Universal Primer coated surface.
  • Apply HEMEL Acrylic Filling Paste on nailheads, joint points, capillary cracks and depths below 3 mm.
  • Apply several thin coats if 1 coat of HEMEL Acrylic Filling Paste application is insufficient to cover deep clefts, cracks and openings. Ensure each layer is completely dry before applying the new one.
  • Perform slight sanding after the application of HEMEL Acrylic Filling Paste and leave it to dry completely.
  • Complete the process by applying Hickson Decor® Breather Paint or Hickson Decor® Aqua Breather Paint on the surface.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20% for exterior.
  • Do not apply the product under direct sunlight or rain.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.