To
Top

HEMEL® Imersol Aqua

Water-based timber* preservative for dipping

*Exterior softwoods to be painted above ground level.
  • Prevents decay from fungi and insects
  • Easy application on site by dipping
  • Clear
  • Odorless
  • Complies with European Norms
  • Environmentally friendly
  • Ready to use
104,95-TL / 20 lt + VAT
914,95-TL/200 lt + VAT


Find a Store

General Features:

  • Prevents decay from fungi and insects
  • Easy application on site by dipping
  • Clear
  • Odorless
  • Complies with European Norms
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Exterior softwoods to be painted above ground level

Packaging:

  • 20 L.
  • 200 L.
  • 1000 L.

This product is clear. Therefore, there is no color chart.

Coverage:

  • At least 15 L for 1 m³

Surface Preparation:

  • Timber surface must be completely clean and moisture content of the wood should be below 20%.

Application:

  • The product is ready to use and does not require thinning.
  • Dip the timber in a stainless steel, polyester or polypropylene tank containing HEMEL Imersol™ Aqua. The dipping time for softwoods is approximately 6 minutes
  • Take out the treated timber over the tank and allow the preservative on the surface to drip for around 2-3 minutes.
  • Wait 24 hours for complete dry before coating.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • HARMFUL FOR BEES.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.