To
Top

Hickson Decor® Aqua Industrial - Stain

Industrial water-based translucent wood stain

  • Natural look
  • Applied by brush/cloth/ dipping
  • Lead-free
  • Environmentally friendly
  • Ready to use
389,95-TL / 15 lt + VAT
Industrial Usage


Find a Store

General Features:

  • Natural look
  • Applied by brush/cloth/ dipping
  • Lead-free
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Suitable for all interior/ exterior wood except floors
  • Doors and window joinery
  • Shutters
  • Claddings
  • Fences
  • Pergolas
  • Balcony railings
  • Roof fringes
  • Interior wooden floorings
  • Panels
  • Wooden ceilings

Packaging:

  • 15 L.
  • SA 1119-White

    SA 1119-White

  • SA 1151-Chestnut

    SA 1151-Chestnut

  • SA 1121-Teak

    SA 1121-Teak

  • SA 1111-Pale Walnut

    SA 1111-Pale Walnut

  • SA 1190-Mahogany

    SA 1190-Mahogany

  • SA 1188-Brown Walnut

    SA 1188-Brown Walnut

  • SA 1184-Brenner Walnut

    SA 1184-Brenner Walnut

  • SA 1192-Brenner Walnut

    SA 1192-Walnut

  • SA 1166-Green

    SA 1166-Green



Important Notice

The colors are applied on pine and are intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture and the absorbency of the wood. Film thickness and the number of coats applied will also affect the end result. To see the final color, it is recommended to apply the coating on the wood to be actually used.

Coverage:

  • 1 L. covers 10-12 m² with 1 coat

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 1 coat by brush, cloth or dipping and wait 4-6 hours for complete dry.
  • Apply in the direction of wood grain to get a homogeneous look.
  • At extremely hot weather you may add HEMEL Stabilizer by 2-3% to extend open time (drying time).
  • For interior use decorative finish, apply HEMEL Varnish for Interior, HEMEL Home, HEMEL Heavy Traffic Parquet Varnish or HEMEL Ultramat as topcoat. For exterior use UV protection and decorative finish, apply HEMEL Varnish for Exterior or Hickson Decor® Aqua Industrial-Varnish VA10XX/VA11XX as topcoat.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Remove the old stain/varnish from the surface completely with a sandpaper.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application”.
  • For interior use decorative finish, apply HEMEL Varnish for Interior, HEMEL Home, HEMEL Heavy Traffic Parquet Varnish or HEMEL Ultramat as topcoat. For exterior use UV protection and decorative finish, apply HEMEL Varnish for Exterior or Hickson Decor® Aqua Industrial-Varnish VA10XX/VA11XX as topcoat.
  • Inspect annually and maintain as required.

Instructions:

  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20% for exterior.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Aqua Industrial-Stain applied surfaces.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying Hickson Decor® Aqua Industrial-Stain.
  • The same product can be purchased in 2,5 L. cans as HEMEL Universal Stain.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.