To
Top

Hickson Decor® Aqua Industrial - Varnish

Industrial water-based exterior wood varnish

  • Transparent
  • Water repellent
  • Allows wood to breathe
  • Applied by spray gun (VA 1130) or brush (VA 1030)
  • UV resistant with SA 11XX stain
  • Thixotropic (can be applied vertically)
  • Does not crack, peel or blister
  • Lead-free
  • Environmentally friendly
  • Ready to use
489,95-TL / 15 lt + VAT
Industrial Usage


Find a Store

General Features:

  • Transparent
  • Water repellent
  • Allows wood to breathe
  • Applied by spray gun (VA 1130) or brush (VA 1030)
  • UV resistant with SA 11XX stain
  • Thixotropic (can be applied vertically)
  • Does not crack, peel or blister
  • Lead-free
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Suitable for all interior/ exterior wood except floors
  • Doors and window joinery
  • Shutters
  • Claddings
  • Fences
  • Pergolas
  • Balcony railings
  • Roof fringes

Packaging:

  • 15 L.
This product is clear. Therefore, there is no color chart.

Coverage:

  • 1 L. covers 3-4 m² with 2 coats

Surface Preparation:

  • Before applying the product, wait 4-6 hours for Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain applied surface to dry.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by brush or spray gun (2,5-3 mm nozzle, min. 3 atm pressure) on Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain applied surface without sanding (wet on wet) and wait 1,5-2 hours between coats.
  • For any reason, if 3 hours exceeded between coats, wait 24 hours and sand the surface with #220/240 sandpaper before applying the second coat.
  • Wait 24 hours for complete dry.
  • For the best result, slight sanding between coats is advised.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application”.
  • Inspect annually and maintain as required.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • To achieve UV protection, must be applied on Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20% for exterior.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Aqua Industrial-Stain applied surfaces.
  • Wait 72 hours before packaging coated/finished goods.
  • The same product can be purchased in 2,5 L. cans as HEMEL Varnish for Exterior.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.