To
Top

Hickson Decor® Aqua Universal Primer

Water-based non-yellowing exterior breather primer

  • Used as a primer under water and solvent-based coatings
  • High coverage
  • Prevents topcoat to turn yellow acting as a barrier when applied on resinous timber
  • Allow wood to breathe
  • Excellent flexibility
  • Environmentally friendly
  • Lead-free
  • Ready to use
234,95-TL / 5 lt + VAT


Find a Store

General Features:

  • Used as a primer under water and solvent-based coatings
  • High coverage
  • Prevents topcoat to turn yellow acting as a barrier when applied on resinous timber
  • Allow wood to breathe
  • Excellent flexibility
  • Environmentally friendly
  • Lead-free
  • Ready to use

Where to Use:

  • Suitable for all exterior wood except floors
  • Doors and window joinery
  • Shutters
  • Cladding
  • Fences
  • Pergolas
  • Balcony parapets
  • Roof fringes
  • Restorations

Packaging:

  • 5 L.
  • White

    White

Coverage:

  • 1 L. covers 10 m² with 1 coat

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 10% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 1 coat by brush and wait 16 hours for complete dry.
  • Apply HEMEL Acrylic Filling Paste on nailheads, joint points, capillary cracks and depths below 3 mm.
  • Perform a slight sanding with sandpaper #180/220 and apply Hickson Decor® Aqua Breather Paint or Hickson Decor® Breather Paint.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Aqua Universal Primer applied surfaces.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying Hickson Decor® Aqua Universal Primer.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.