To
Top

Hickson Decor® Aqua Wood Stain

Water-based translucent exterior wood finish that allows wood to breathe

  • Water repellent
  • Allows wood to breathe
  • Translucent wood finish
  • Durable and resistant to exterior weather conditions
  • UV resistant
  • Lead-free
  • Does not crack, peel or blister
  • Environmentally friendly
  • Ready to use
  52,95-TL / 1 lt + VAT
117,95-TL /2,5 lt+ VAT
225,50-TL / 5 lt + VAT


Satın Al

General Features:

  • Water repellent
  • Allows wood to breathe
  • Translucent wood finish
  • Durable and resistant to exterior weather conditions
  • UV resistant
  • Lead-free
  • Does not crack, peel or blister
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Suitable for all exterior wood except floors
  • Doors and window joinery
  • Shutters
  • Cladding
  • Fences
  • Pergolas
  • Balcony railings
  • Roof fringes

Packaging:

  • 1 L.
  • 2,5 L.
  • 5 L.
  • 15 L. (Upon request)
  • Warm Grey

    Warm Grey

  • Western

    Antique Pine

  • Tanalith Green

    Tanalith Green

  • Natural

    Natural

  • Western

    Walnut

  • Light

    Light

  • Chestnut

    Chestnut

  • Western

    Western

  • Teak

    Teak

  • Olive

    Olive

  • Tanatone Brown

    Tanatone Brown

  • Calif

    Calif

  • Rosewood

    Rosewood

  • Burma

    Burma

  • Jade

    Jade

  • Creol

    Creol

  • Ebon

    Ebon

Önemli Not

Burada gösterilen renkler çam üzerine uygulanmış olup gerçeğe yakın olmasına özen gösterilmiştir. Elde edeceğiniz renk ve parlaklık, ahşabın özelliklerine, dokusuna emiciliğine göre değişiklik gösterecektir. Ayrıca, boyanın ne kalınlıkta ve kaç kat sürüldüğü de sonucu etkileyecektir. Gerçek rengi görebilmek için, kullanılacak ahşap üzerinde denenmesi önerilir.

Covarege:

  • 1 L. covers 6-7 m² with 2 coats

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 10% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by brush and wait 16 hours between coats.
  • Perform a slight sanding with sandpaper #180/220 between coats.
  • Wait 16 hours for complete dry.
  • Apply in the direction of wood grain to get a homogeneous look.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application” with 1 or 2 coats depending on weathering.
  • Inspect annually and maintain as required..

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Aqua Wood Stain applied surfaces.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying Hickson Decor® Aqua Wood Stain.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.