To
Top

HEMEL® Panel Door Paint-Industrial

Industrial water-based pigmented topcoat for interior panel doors

  • Applied by spray gun for industrial use
  • High hiding power
  • Does not hide texture of wood
  • Odorless
  • Lead-free
  • Environmentally friendly
  • Ready to use
White,Sea Shell, Cream:
137,95-TL / 5 lt + VAT
374,95-TL /15 lt + VAT
** Upon request, special colors can be produced using the NCS and RAL color charts.

Find a Store

General Features:

  • Applied by spray gun for industrial use
  • High hiding power
  • Does not hide texture of wood
  • Odorless
  • Lead-free
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Panel doors

Packaging:

  • 5 L./6 Kg.
  • 15 L./18 Kg.
  • Polar White

    Polar White

  • Deniz Kabuğu

    Sea Shell

  • Krem

    Cream

  • Sınırsız Renk

    Unlimited color alternatives (*)

Important Notice

(*) Upon request, special colors can be produced using the NCS and RAL color charts.
The colors are intended to approximate the final color. To see the final color, it is recommended to apply the coating on the wood to be actually used.

Coverage:

  • 1L. covers 6-8 m² with 1 coat

Surface Preparation:

  • Apply 1-2 coats HEMEL Wood Primer for Interior on the surface before applying HEMEL Panel Door Paint-Industrial.
  • Wait 24 hours for HEMEL Wood Primer for Interior applied surface to dry.
  • Perform a slight sanding HEMEL Wood Primer for Interior coated surface with sandpaper #180/220 (aluminium oxide or silicon carbide type sandpaper is recommended).
  • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 2-3% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 1 coat by spray gun (2,5-3 mm nozzle, min. 3 atm pressure) and wait 24 hours for complete dry.
  • The area should be ventilated during and after the application to promote the drying.

Instructions:

  • FOR INTERIOR USE ONLY.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Wait 72 hours before packaging coated/finished goods.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.