To
Top

HEMEL® Sport Varnish

One component non-slip varnish for sports floorings

  • Non-slip
  • High-gloss
  • High abrasion and scratch resistance
  • Elastic
  • Odorless
  • Lead-free
  • Environmentally friendly
  • Ready to use
84,95-TL / 10 lt + VAT
Find a Store
 
 
 
 

General Features:

  • Non-slip
  • High-gloss
  • High abrasion and scratch resistance
  • Elastic
  • Odorless
  • Lead-free
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Wooden sports floorings

Packaging:

  • 10 L.

Only available in high-gloss finish.

Coverage:

  • 1 L. covers 6-7 m² with 2 coats

Surface Preparation:

  • Before applying HEMEL Sport Varnish, wait 24 hours for HEMEL Sport Primer applied surfaces to dry.
  • Sand HEMEL Sport Primer coated surface with sandpaper #180/220 (aluminium oxide or silicon carbide type sandpaper is recommended).
  • Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
  • Clean the remaining dust with a damp cloth.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 2-3% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply HEMEL Sport Varnish on HEMEL Sport Primer coated surfaces only.
  • Apply the product in 2 coats by a brush or roller without sanding and wait 1,5-2 hours between coats.
  • For any reason, If 8 hours exceeded after applying the first coat, wait 24 hours and sand the surface with sandpaper #180/220 (aluminium oxide or silicon carbide type sandpaper is recommended) before applying 2nd coat.
  • The area should be ventilated during and after the application to promote the drying.
  • Allow 7 days for full cure. Do not use the floors actively for 7-10 days.

Instructions:

  • FOR INTERIOR USE ONLY.
  • Do not apply products such as nitro, polyurethane basecoats or primers before HEMEL Sport Varnish.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be below 12%
  • The area should be ventilated during and after the application to promote the drying.
  • The product should not be applied when the weather or surface temperature is below 10°C
  • The varnished floor should not be cleaned with ammonia containing cleaning materials.
  • The varnished floor can be stepped on after 24 hours. Allow 7 days before spreading carpet and/or cleaning.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.