To
Top

HEMEL® Varnish for Interior

Water-based clear interior wood varnish

  • Clear
  • Odorless
  • Enhances the natural beauty of wood
  • Lead-free
  • Environmentally friendly
  • Ready to use
38,50-TL /0,75 lt+ VAT
84,95-TL /2,5 lt+ VAT
424,95-TL /15 lt*+VAT
* Produced upon request.

Find a Store

General Features:

  • Clear
  • Odorless
  • Enhances the natural beauty of wood
  • Lead-free
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Suitable for all interior wooden surfaces except floors
  • Panels
  • Wooden ceilings

Packaging:

  • 0.75 L.
  • 2.5 L.
  • 15 L.

This product is clear. Therefore, there is no color chart.
If preferred, HEMEL Universal Stain can be used to stain interior wooden surfaces.

Coverage:

  • 1 L. covers 7-8 m² with 2 coats

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • If HEMEL Universal Stain or Hickson Decor® Aqua Industrial-Stain is applied, wait 4-6 hours for complete dry.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #180/220.
    • Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by brush or roller and wait 1,5-2 hours between coats.
  • Perform a slight sanding with sandpaper #180/220 between coats.
  • Wait 24 hours for complete dry.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust..
  • Repeat same process as described in “Application” with 1 or 2 coats depending on wearing.
  • Inspect annually and maintain as required.

Instructions:

  • FOR INTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after HEMEL Varnish for Interior applied surfaces.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.