To
Top

HEMEL® Wood Primer for Interior

Water-based wood primer for interior

  • Applied by spray gun
  • High filling power
  • Easy sanding
  • Elastic
  • High adhesion power
  • Odorless
  • Lead-free
  • Environmentally friendly
  • Ready to use
109,95-TL / 5 lt + VAT
284,95-TL / 15 lt + VAT


Find a Store

General Features:

  • Applied by spray gun
  • High filling power
  • Easy sanding
  • Elastic
  • High adhesion power
  • Odorless
  • Lead-free
  • Environmentally friendly
  • Ready to use

Where to Use:

  • Panel doors
  • All interior solid wood furniture

Packaging:

  • 5 L./7 Kg.
  • 15 L./21 Kg.
  • Polar-White

    Polar White



Important Notice

The colors are intended to approximate the final color. To see the final color, it is recommended to apply the coating on the wood to be actually used.

Coverage:

  • 1 L. covers 3-4 m² with 2 coats

Surface Preparation:

  • Remove any dirt, oil and wood dust from the wood surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #180/220.
    • Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 2-3% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by spray gun (2,5-3 mm nozzle, min. 3 atm pressure) without sanding (wet on wet) and wait 1,5-2 hours between coats.
  • For any reason, if 3 hours exceeded between coats, wait 24 hours and sand the surface with #220/240 sandpaper before applying the second coat.
  • Wait 24 hours for complete dry.
  • For the best result, perform a slight sanding between coats is advised.
  • The area should be ventilated during and after the application to promote the drying.

Instructions::

  • FOR INTERIOR USE ONLY.
  • Different results can be obtained depending on quality of the MDF, it is recommended to try on a small area before use.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.