To
Top

HEMEL®Mastic Acrylique

Mastic utlisé pour réparation et remplissage dessous les peintures couvrantes à base de solvant et d'eau

  • Utilisé pour remplir les petites ouvertures et combler les fissures capillaires telles que les jointures et tête de clou
  • Séchage rapide
  • Puissance de remplissage élevée
  • Flexible
  • Ponçage facile
  • Anti-rouille
  • Applicable sur de courts intervalles
  • Prêt à l’emploi
**,**-TL / 310 ml + VAT


Find a Store




Caractéristiques générales:

  • Utilisé pour remplir les petites ouvertures et combler les fissures capillaires telles que les jointures et tête de clou
  • Séchage rapide
  • Puissance de remplissage élevée
  • Flexible
  • Ponçage facile
  • Anti-rouille
  • Applicable sur de courts intervalles
  • Prêt à l’emploi

Domaine d’utilisation:

  • Toutes les boiseries extérieures exceptées le plancher
  • Cadres de portes et fenêtres
  • Lambriss
  • Revêtements de façade
  • Clôtures
  • Garde-corps de balcon
  • Restaurations

Emballage:

  • 1,3 Kg
  • Blanc

    Blanc

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.
    • Apply Hickson Decor® Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
    • Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120. Thoroughly clean the generated dust.
    • Apply Hickson Decor Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
    • Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Apply Hickson Decor Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
    • Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.

Application::

  • The product is ready to use.
  • Apply HEMEL Acrylic Filling Paste on previously Hickson Decor® Aqua Universal Primer coated surface.
  • Apply HEMEL Acrylic Filling Paste on nailheads, joint points, capillary cracks and depths below 3 mm.
  • Apply several thin coats if 1 coat of HEMEL Acrylic Filling Paste application is insufficient to cover deep clefts, cracks and openings. Ensure each layer is completely dry before applying the new one.
  • Perform slight sanding after the application of HEMEL Acrylic Filling Paste and leave it to dry completely.
  • Complete the process by applying Hickson Decor® Breather Paint or Hickson Decor® Aqua Breather Paint on the surface.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20% for exterior.
  • Do not apply the product under direct sunlight or rain.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.