To
Top

HEMEL® Imersol Aqua

Imprégnant à base d'eau appliqué par immersion pour éviter la corrosion du bois*

*Bois à texture douce tel que le pin etc. à peindre au niveau du sol.
  • Efficace contre les vers et les champignons
  • Application facile avec le immersion
  • Incolore
  • Inodore
  • Conforme aux normes européennes
  • Respectueux de l'environnement
  • Prêt à l’emploi
**,**-TL / 20 lt + VAT
**,**-TL/200 lt + VAT


Find a Store

Caractéristiques générales:

  • Efficace contre les vers et les champignons
  • Application facile avec le immersion
  • Incolore
  • Inodore
  • Conforme aux normes européennes
  • Respectueux de l'environnement
  • Prêt à l’emploi

Domaines d'utilisation :

  • Bois à texture douce tel que le pin etc. à peindre au niveau du sol

Emballage:

  • 1 L.
  • 5 L.
  • 20 L.

Ce produit est incolore et n'a pas de nuancier.

Pour des informations techniques détaillées et un soutien, veuillez contacter HEMEL.

Quantité d'application :

  • Au moins 15 L pour 1 m3.

Surface Preparation:

  • Timber surface must be completely clean and moisture content of the wood should be below 20%.

Application:

  • The product is ready to use and does not require thinning.
  • Dip the timber in a stainless steel, polyester or polypropylene tank containing HEMEL Imersol™ Aqua. The dipping time for softwoods is approximately 6 minutes
  • Take out the treated timber over the tank and allow the preservative on the surface to drip for around 2-3 minutes.
  • Wait 24 hours for complete dry before coating.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • HARMFUL FOR BEES.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.