To
Top

HEMEL® Deck Stain

Peinture semi-transparente antidérapante pour les planchers de bois extérieurs

  • Semi-transparent
  • Respire, évacue l’humidité du bois
  • Haute résistance aux UV
  • Surface antidérapante avec microparticules
  • Hydrofuge
  • Sans plomb
  • Respectueux de l’environnement


Find a Store
 
 
 
 

Caractéristiques Générales:

  • Semi-transparent
  • Respire, évacue l’humidité du bois
  • Haute résistance aux UV
  • Surface antidérapante avec microparticules
  • Hydrofuge
  • Sans plomb
  • Respectueux de l’environnement

Domaines d’utilisation:

  • Terrasses

Emballage:

  • 2,5 L.
  • Pin Antique

    Pin Antique

  • Clair

    Clair

  • Chataîgne

    Chataîgne

  • Tanalith Vert

    Tanalith Vert

  • Teck

    Teck

 

Important Notice

Les couleurs montrées ici ont été appliquées sur le pin et le soin a été pris pour le rendre proche de la réalité. La couleur et la brillance que vous obtiendrez dépendront des caractéristiques, de l'absorption de la texture du bois. En outre, le résultat sera affecté par l'épaisseur de la peinture et le nombre de couches appliquées. Afin de pouvoir voir la vraie couleur, il est recommandé de la tester sur le bois à utiliser.

Quantité d’application:

  • Avec 1 L., environ 6-7 m2 de surface est peinte sur 2 couches

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120 or restore wood surface using HEMEL Deck Restorer.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sanding machine.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 5% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by a brush or roller without sanding between coats.
  • Wait 6 hours between coats.
  • Apply in the direction of wood grain to get a homogeneous look.
  • The treated surface may be stepped on 24 hours.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Remove the old paint from the surface completely with a sanding machine.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application”.
  • Inspect annually and maintain as required.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after HEMEL Deck Stain applied surfaces.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying HEMEL Deck Stain.
  • The product should be protected from freezing
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.