To
Top

HEMEL® Teak Oil

Huile de teck pour l'entretien régulier des meubles de jardin et des boiseries extérieures

  • Pénètre le bois en profondeur
  • Nourrit et revitalise
  • Entretien facile
  • Hydrofuge
  • Résistant à l’eau de mer
  • Sans plomb
  • Prêt à l’emploi
**,**-TL /0,40 lt+VAT
**,**-TL /0,75 lt+VAT
**,**-TL /2,5 lt+VAT
**,**-TL / 5 lt+VAT
**,**-TL / 15 lt+VAT

 
Find a Store
 
 
 
 

Caractéristiques Générales:

  • Pénètre le bois en profondeur
  • Nourrit et revitalise
  • Entretien facile
  • Hydrofuge
  • Résistant à l’eau de mer
  • Sans plomb
  • Prêt à l’emploi

Domaines d’utilisation:

  • Mobilier de jardin et boiseries extérieures
  • Surfaces en bois au dessus du niveau de la mer des bâteaux

Emballage:

  • 0,400 L. (Spray)
  • 0,750 L.
  • 2,5 L.
  • 5 L.
  • 15 L. (Produit sur commande)

Ce produit est transparent et n’a pas de nuancier.

Quantité d’application:

  • Avec 1 L. 8-10 m2 de surfaces dans les bois tendres, 15-18 m2 dans les bois durs peuvent être lubrifiées

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120 or restore wood surface using HEMEL Deck Restorer.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use.
  • Apply the product in 1 coat by a brush or cloth and remove the excess oil by cloth for the best result.
  • Wait 24 hours for complete dry.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application”.
  • Maintenance should be repeated every season.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying HEMEL Teak Oil.
  • The product should be stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with mineral spirits after the application.

Safety Precautions:

  • OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.