HEMEL® Sport Primer

Грунтовка однокомпонентная для спортивного паркета
- С высокой особенностью наполнителя
- Легкая зачистка наждачной бумагой
- Эластичность
- Без запаха
- Без свинца
- Экологичный
- Готов для применения
Find a Store
Общие характеристики:
- С высокой особенностью наполнителя
- Легкая зачистка наждачной бумагой
- Эластичность
- Без запаха
- Без свинца
- Экологичный
- Готов для применения
Область применения:
- Массивный или ламинированный паркет для спортивных залов
Упаковка:
- 10 л
Hemel Products Catalogue
Hemel_Product_Catalogue.pdfSDS-HEMEL Sport Primer
SDS-HEMEL-Sport-Primer.pdfTDS-HEMEL Sport Primer
TDS-HEMEL-Sport-Primer-en.pdfEN71-3 Toy Safety Certificate - HEMEL Sport Primer
EN71-3-HEMEL-Sport-Primer.pdfHEMEL Sport-Sport Floors Varnish System EN 14904 Skid Resistance Cerificate
HEMEL-Sport-Sport-Floors-Varnish-System-EN-14904-Skid-Resistance-Cerificate.pdfИспользуемое количество:
- 1 л в 2 слоя покрывает 6-7 м2 поверхности
Surface Preparation:
- Do not apply products such as nitro, polyurethane basecoats or primers before HEMEL Sport Primer.
- Clean the surface completely and sand with parquet sanding machine using sandpaper #40, #60, #100/120, respectively.
- Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
- Clean the remaining dust with a damp cloth.
- Do not use products like cellulose or polyurethane filler or primer before the application of the product. As a filler, mix the wood dust with the product and fill all gaps and joints of the parquet. Clean the excess paste after it has dried out.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- Apply the product in 2 coats by a brush or roller without sanding and wait 1,5-2 hours between coats.
- For any reason, if 8 hours exceeded after applying the first coat, wait 24 hours and sand the surface with sandpaper #180/220 (aluminium oxide or silicon carbide type sandpaper is recommended) before applying 2nd coat.
- Wait 24 hours for complete dry.
- Perform sanding with sandpaper #180/220 (aluminium oxide or silicon carbide type sandpaper is recommended) before applying HEMEL Sport Varnish.
- The area should be ventilated during and after the application to promote the drying.
- HEMEL Sport Colors should be applied on HEMEL Sport Primer before HEMEL Sport Varnish.
Instructions:
- FOR INTERIOR USE ONLY.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- The moisture content of the wood should be below 12%.
- The area should be ventilated during and after the application to promote the drying.
- The product should not be applied when the weather or surface temperature is below 10°C.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
- OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.