HEMEL^® Sport Varnish

Имеется только глянцевый тип.

Используемое количество:

• 1 л в 2 слоя покрывает поверхность площадью 6-7 м2

Surface Preparation:

• Before applying HEMEL Sport Varnish, wait 24 hours for HEMEL Sport Primer applied surfaces to dry.
• Sand HEMEL Sport Primer coated surface with sandpaper #180/220 (aluminium oxide or silicon carbide type sandpaper is recommended).
• Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
• Clean the remaining dust with a damp cloth.

Application:

• The product is ready to use and does not require thinning. (At very high temperatures 2-3% drinking water may be added).
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply HEMEL Sport Varnish on HEMEL Sport Primer coated surfaces only.
• Apply the product in 2 coats by a brush or roller without sanding and wait 1,5-2 hours between coats.
• For any reason, If 8 hours exceeded after applying the first coat, wait 24 hours and sand the surface with sandpaper #180/220 (aluminium oxide or silicon carbide type sandpaper is recommended) before applying 2nd coat.
• The area should be ventilated during and after the application to promote the drying.
• Allow 7 days for full cure. Do not use the floors actively for 7-10 days.

Instructions:

• FOR INTERIOR USE ONLY.
• Do not apply products such as nitro, polyurethane basecoats or primers before HEMEL Sport Varnish.
• Keep product closed when not in use.
• The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
• The moisture content of the wood should be below 12%
• The area should be ventilated during and after the application to promote the drying.
• The product should not be applied when the weather or surface temperature is below 10°C
• The varnished floor should not be cleaned with ammonia containing cleaning materials.
• The varnished floor can be stepped on after 24 hours. Allow 7 days before spreading carpet and/or cleaning.
• The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

• OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty plastic cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/plastic cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.