HEMEL^®Акриловая затирка

• 

  White

Hemel Products Catalogue

Hemel_Product_Catalogue.pdf

SDS-HEMEL Acrylic Filling Paste

SDS-HEMEL-Acrylic-Filling-Paste.pdf

TDS-HEMEL Acrylic Filling Paste

TDS-HEMEL-Acrylic-Filling-Paste-en.pdf

EN 71-3 Toy Safety Certificate - HEMEL Acrylic Filling Paste

EN71-3-Hemel-Akrilik-Dolgu-Macunu.pdf

Surface Preparation:

• Remove any dirt, oil and wood dust from the surface.

New Wood Surfaces:

• Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.
• Apply Hickson Decor® Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
• Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.

Old Uncoated Wood Surfaces:

• Sand the weathered surface with sandpaper #80/120. Thoroughly clean the generated dust.
• Apply Hickson Decor Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
• Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.

Coated Wood Surfaces:

• Do not apply the product directly on pre-coated surfaces.
• Remove the old paint/varnish from the surface completely with a sandpaper.
• Apply Hickson Decor Aqua Universal Primer as 1 coat by brush and wait 16 hours for complete dry.
• Perform slight sanding with sandpaper #80/120. Thoroughly clean the generated dust.

Application::

• The product is ready to use.
• Apply HEMEL Acrylic Filling Paste on previously Hickson Decor® Aqua Universal Primer coated surface.
• Apply HEMEL Acrylic Filling Paste on nailheads, joint points, capillary cracks and depths below 3 mm.
• Apply several thin coats if 1 coat of HEMEL Acrylic Filling Paste application is insufficient to cover deep clefts, cracks and openings. Ensure each layer is completely dry before applying the new one.
• Perform slight sanding after the application of HEMEL Acrylic Filling Paste and leave it to dry completely.
• Complete the process by applying Hickson Decor® Breather Paint or Hickson Decor® Aqua Breather Paint on the surface.

Instructions:

• FOR EXTERIOR USE ONLY.
• NOT SUITABLE FOR FLOORINGS.
• Keep product closed when not in use.
• The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
• The moisture content of the wood should be max. 20% for exterior.
• Do not apply the product under direct sunlight or rain.
• The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty plastic cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/plastic cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.