To
Top

HEMEL® Varnish for Exterior

Лак на водной основе для наружных деревянных поверхностей

  • Прозрачный
  • Водооталкивающий
  • Дышащий, выводит наружу влагу из нутри дерева
  • Устойчив на солнечный свет (УФ-лучи) (при использовании вместе с цветом SA 11XX)
  • Не набухает, не вздувается, не осыпается и не трескается
  • Без свинца
  • Экологический
  • Готов для применения
**,**-TL /2,5 lt + VAT


Find a Store


Общие характеристики:

  • Прозрачный
  • Водооталкивающий
  • Дышащий, выводит наружу влагу из нутри дерева
  • Устойчив на солнечный свет (УФ-лучи) (при использовании вместе с цветом SA 11XX)
  • Не набухает, не вздувается, не осыпается и не трескается
  • Без свинца
  • Экологический
  • Готов для применения

Область применения:

  • Все виды дерева в наружных помещениях, кроме пола
  • Дверные и оконные рамы
  • Жалюзи
  • Фасадные покрытия
  • Ограждения
  • Пергола
  • Балконные ограждения
  • Кровельные навесы

Упаковка:

  • 2,5 л

Данная продукция является бесцветной и не имеет цветовую гамму.

Используемое количество:

  • 1 л покрывает в 2 слоя поверхность площадью 3-4 м2

Surface Preparation:

  • Before applying the product, wait 4-6 hours for HEMEL Universal Stain or Hickson Decor® Aqua Industrial-Stain applied surface to dry.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by brush on HEMEL Universal Stain or Hickson Decor® Aqua Industrial-Stain applied surface without sanding (wet on wet) and wait 1,5-2 hours between coats.
  • For any reason, if 3 hours exceeded between coats, wait 24 hours and sand the surface with #220/240 sandpaper before applying the second coat.
  • Wait 24 hours for complete dry.
  • For the best result, slight sanding between coats is advised.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application” with 1 or 2 coats depending on weathering.
  • Inspect annually and maintain as required.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • To achieve UV protection, must be applied on HEMEL Universal Stain or Hickson Decor® Aqua Industrial-Stain.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after HEMEL Varnish for Exterior applied surfaces.
  • Wait 72 hours before packaging coated/finished goods.
  • The same product can be purchased in 15 L. cans as Hickson Decor® Aqua Industrial-Varnish.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.