Hickson Decor® Aqua Industrial Varnish

Лак промышленный на водной основе для наружных деревянных поверхностей
- Прозрачный
- Водооталкивающий
- Дышащий, выводит наружу влагу из нутри дерева
- Примняется распылителем (VA1130) или кистью (VA1030)
- Устойчив на солнечный свет (УФ-лучи) (при использовании вместе с цветом SA 11XX)
- Может наноситься вертикально
- Не набухает, не вздувается, не осыпается и не трескается
- Без свинца
- Экологический
- Готова для применения
**,**-TL / 15 lt + VAT
Industrial Usage
Find a Store
Общие характеристики:
- Прозрачный
- Водооталкивающий
- Дышащий, выводит наружу влагу из нутри дерева
- Примняется распылителем (VA1130) или кистью (VA1030)
- Устойчив на солнечный свет (УФ-лучи) (при использовании вместе с цветом SA 11XX)
- Может наноситься вертикально
- Не набухает, не вздувается, не осыпается и не трескается
- Без свинца
- Экологический
- Готова для применения
Область применения:
- Все виды дерева в наружных помещениях, кроме пола
- Дверные и оконные рамы
- Жалюзи
- Фасадные покрытия
- Ограждения
- Пергола
- Балконные ограждения
- Кровельные навесы
Упаковка:
- 15 л
Данная продукция является бесцветной и не имеет цветовую гамму.
Hemel Products Catalogue
Hemel_Product_Catalogue.pdfSDS-Hickson Decor® Aqua Industrial-Varnish
SDS-Hickson-Decor-Aqua-Industrial-Varnish.pdfTDS-Hickson Decor® Aqua Industrial-Varnish
TDS-Hickson-Decor-Aqua-Industrial-Varnish-en.pdfEN71-3 Toy Safety Certificates - Hickson Decor® Wood Stain Endustriyel-Varnish - Brush
EN71-3-Hickson-Decor-Wood-Stain-Endustriyel-Cila-Firca-VA-1030.pdfEN71-3 Toy Safety Certificates - Hickson Decor® Wood Stain Endustriyel-Varnish -
EN71-3-Hickson-Decor-Wood-Stain-Endustriyel-Cila-Tabanca-VA-1130.pdfИспользуемое количество:
- 1 л покрывает в 2 слоя поверхность площадью 3-4 м2
Surface Preparation:
- Before applying the product, wait 4-6 hours for Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain applied surface to dry.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- Apply the product in 2 coats by brush or spray gun (2,5-3 mm nozzle, min. 3 atm pressure) on Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain applied surface without sanding (wet on wet) and wait 1,5-2 hours between coats.
- For any reason, if 3 hours exceeded between coats, wait 24 hours and sand the surface with #220/240 sandpaper before applying the second coat.
- Wait 24 hours for complete dry.
- For the best result, slight sanding between coats is advised.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a slight sanding.
- Thoroughly clean the generated dust.
- Repeat same process as described in “Application”.
- Inspect annually and maintain as required.
Instructions:
- FOR EXTERIOR USE ONLY.
- NOT SUITABLE FOR FLOORINGS.
- To achieve UV protection, must be applied on Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- The moisture content of the wood should be max. 20% for exterior.
- Do not apply the product under direct sunlight or rain.
- Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Aqua Industrial-Stain applied surfaces.
- Wait 72 hours before packaging coated/finished goods.
- The same product can be purchased in 2,5 L. cans as HEMEL Varnish for Exterior.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.