To
Top

HEMEL® Home

Лак для паркета однокомпонентный

  • Без запаха
  • Жесткий и устойчивый
  • Обладает высокой устойчивостью на царапины и износ
  • Легкий уход
  • Без свинца
  • Экологическая
  • Готова для применения


Find a Store
Consumption Calculator
References

Общие характеристики:

  • Без запаха
  • Жесткий и устойчивый
  • Обладает высокой устойчивостью на царапины и износ
  • Легкий уход
  • Без свинца
  • Экологическая
  • Готова для применения

Область применения:

  • Массивный или ламинированный паркет

Упаковка:

  • 2,5 л

Предлагается в трех вариациях – матовый, шелковисто-матовый и глянцевый.
При необходимости окрашивания паркетного пола, можно использовать HEMEL Universal Stain (краситель для внутренних/наружных поверхностей).

Используемое количество:

  • 1 л в 3 слоя покрывает около 4-5 м2 поверхности

Surface Preparation::

  • Do not use products like cellulose or polyurethane filler or primer before the application of the product. As a filler, mix the wood dust with the product and fill all gaps and joints of the parquet. Clean the excess paste after it has dried out.
New Wooden Floors:
  • Clean the surface completely.
  • Sand the surface with parquet sanding machine or hand using sandpaper #120/150. ○ Thoroughly clean the generated dust and remove it completely from the surface with a
  • Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
  • HEMEL Universal Stain can be used for coloring the parquet floor. After the coloring, allow at least 6 hours to dry before varnish application.
Varnished Wooden Floors:
  • Remove the old varnish from the parquet completely with a scraping machine. Remove any dirt, oil, wood dust and old varnish residues from the surface.
  • Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
  • Remove the remaining dust with a damp cloth.

Application:

  • The product is ready to use and does not require thinning. (At very high temperatures 2-3% drinking water may be added).
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the 1st coat by a brush or roller and leave it to dry for 2 hours.
  • Perform a slight sanding with sandpaper #180/220 before applying 2nd coat.
  • Apply the 2nd and 3rd coats in 2 hours intervals by sanding with sandpaper #180/220 between the coats.
  • For any reason, if 8 hours exceeded between coats, wait 24 hours and sand the surface with sandpaper #220/240 (aluminium oxide or silicon carbide type sandpaper is recommended) before applying the next coat.
  • Apply the 1st varnish coat first across the grain and then along the grain to leave equal and sufficient amount on parquet surface without sweeping too much.
  • The area should be ventilated after the application to promote the drying.
  • Allow 7 days for full cure.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Remove the old varnish from the parquet completely with a scraping machine. Remove any dirt, oil, wood dust and old varnish residues from the surface.
  • Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
  • Remove the remaining dust with a damp cloth.
  • Repeat same process as described in “Application” with 3 coats.
  • Inspect annually and maintain as required.

Instructions:

  • FOR INTERIOR USE ONLY.
  • Do not apply products such as nitro, polyurethane basecoats or primers before HEMEL Home.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be below 12%.
  • The area should be ventilated during and after the application to promote the drying.
  • The product should not be applied when the weather or surface temperature is below 10°C.
  • The varnished floor should not be cleaned with ammonia containing cleaning materials.
  • The varnished floor can be stepped on after 24 hours. Allow 7 days before spreading carpet and/or cleaning.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.