HEMEL® Deck Oil

Pigmented penetrating oil specially developed for decks

  • Beautiful natural finish
  • Non-film forming
  • UV resistant
  • Prevents splintering
  • Water repellent
  • Lead-free
  • Ready to use
**,**-TL /2,5 lt +VAT
**,**-TL /15 lt* +VAT
* Produced upon requet.
Find a Store

General Features:

  • Beautiful natural finish
  • Non-film forming
  • UV resistant
  • Prevents splintering
  • Water repellent
  • One-coat protection
  • Lead-free
  • Ready to use

Where to Use:

  • Decks


  • 2,5 L.
  • 15 L.
Warning: Oil soaked fabric can be self-igniting. Fabrics should be completely soaked in water and disposed of after being used.
  • C-Antique Pine

    Antique Pine

  • Light

  • Tanalith Green

    Tanalith Green

  • Teak

  • Walnut

  • Tanatone Brown


Important Notice

The colors are applied on pine and are intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture and the absorbency of the wood. Film thickness and the number of coats applied will also affect the end result. To see the final color, it is recommended to apply the coating on the wood to be actually used.


  • 1 L. covers 10-12 m² on softwoods and 15-18 m² on hardwoods

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
New Wood Surfaces:
  • Sand the surface with sandpaper #80/120.
  • Thoroughly clean the generated dust.
Old Uncoated Wood Surfaces:
  • Sand the weathered surface with sandpaper #80/120 or restore wood surface using HEMEL Deck Restorer.
Coated Wood Surfaces:
  • Do not apply the product directly on pre-coated surfaces.
  • Remove the old paint/varnish from the surface completely with a sanding machine.
  • Thoroughly clean the generated dust.


  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 1 coat by a brush or roller and remove the excess oil by brush for the best result.
  • Apply in the direction of wood grain to get a homogeneous look.
  • The treated surface may be stepped on after 24 hours.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application”.
  • Inspect annually and maintain as required.


  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying HEMEL Deck Oil.
  • The product should be stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with mineral spirits after the application.

Safety Precautions:

  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.