To
Top

HEMEL® Aqua Stone

Imprégnation en pierre hydrofuge transparente à base d'eau

  • Transparent, ne change pas l'apparence de la surface
  • Ne forme pas une couche de pellicule
  • Avec sa fonction Hydrofuge élevée, prévient les dommages dus au gel
  • Surface; protège contre la pluie, les impuretés, le sel, le calcaire et la formation de mousse
  • Prévient la formation de poussière
  • Respire
  • Prêt à l’emploi
 

 
Find a Store
 
 
 
 
 

Caractéristiques Générales:

  • Transparent, ne change pas l'apparence de la surface
  • Ne forme pas une couche de pellicule
  • Avec sa fonction Hydrofuge élevée, prévient les dommages dus au gel
  • Surface; protège contre la pluie, les impuretés, le sel, le calcaire et la formation de mousse
  • Prévient la formation de poussière
  • Respire
  • Prêt à l’emploi

Domaines d’utilisation:

  • Ciment, béton, ardoise
  • Brique, briquette, terre cuite
  • Pierres naturelles et artificielles en propriété absorbante non vernies
  • Restauration des monuments historiques

Emballage Boyutları:

  • 5 L.
  • 15 L.
 
Ce produit est transparent et n’a pas de nuancier.
 

 

Quantité d’application:

  • Selon le type de surface 5-15 m2 (toutes les couches incluses)

Surface Preparation:

  • Remove any dirt and dust from the surface.
  • If exists; clear the surface from oil, rust, mold or moss completely.
  • Repair cracks and loose parts on the surface.
  • Do not apply the product on pre-coated surfaces.
  • Allow the wet surface to dry completely before applying the product.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use and check its homogeneity.
  • Apply the product in 2 coats by a brush, roller or spraying. Apply the 2nd coat before 1st coat dries (wet on wet).
  • Wait 24 hours for complete dry.
  • If it rains during application, cover the applied surface and keep it closed until completely dries.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • Do not apply the product under direct sunlight or rain.
  • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with mineral spirits after the application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.