To
Top

Hickson Decor® Plus Wood Stain

Peinture extérieure bois semi-transparente respirante à base de solvant

  • Hydrofuge
  • Respire, évacue l’humidité du bois
  • Semi-transparent montrant la texture
  • Durable contre les conditions climatiques extérieures
  • Résistant aux rayons solaires (UV)
  • Sans plomb
  • Ne s’écaille pas, ne gonfle pas et ne se fissure pas
  • Prêt à l’emploi
**,**-TL / 1 lt+ VAT
**,**-TL /2,5 lt+ VAT
**,**-TL / 5 lt+ VAT
**,**-TL /15 lt*+ VAT
* Produced upon request.
 
Find a Store
 
 
 
 
 

Caractéristiques générales:

  • Hydrofuge
  • Respire, évacue l’humidité du bois
  • Semi-transparent montrant la texture
  • Durable contre les conditions climatiques extérieures
  • Résistant aux rayons solaires (UV)
  • Sans plomb
  • Ne s’écaille pas, ne gonfle pas et ne se fissure pas
  • Prêt à l’emploi

Domaines d’utilisation:

  • Toutes les boiseries extérieures exceptées le sol
  • Cadres de portes et fenêtres
  • Volets
  • Revêtements de façade
  • Clôtures
  • Pergolas
  • Garde-corps de balcon
  • Avant-toît

Emballage:

  • 1 L.
  • 2,5 L.
  • 5 L.
  • 15 L. (Produit sur commande)
  • Gris chaud

    Gris chaud *

  • Pin antique

    Pin antique

  • Tanalith Vert

    Tanalith Vert*

  • Naturel

    Naturel

  • Noyer

    Noyer

  • Clair

    Clair

  • Chataîgne

    Chataîgne

  • Western

    Western*

  • Teck

    Teck

  • Olive

    Olive *

  • Tanatone Marron

    Tanatone Marron

  • Calif

    Calif

  • Bois de rose

    Bois de rose

  • Burma

    Burma

  • Jade

    Jade *

  • Créole

    Créole

  • Ebon

    Ebon *

 

Warning

Les couleurs montrées ici ont été appliquées sur le pin, et on a pris soin de le rendre proche de la réalité. La couleur et la brillance que vous obtiendrez dépendront des caractéristiques, de l'absorption, de la texture du bois. En outre, le résultat sera affecté par l'épaisseur de la peinture et le nmbre de couches appliquées. Afin de pouvoir voir la vraie couleur, il est recommandé de la tester sur le bois à utiliser .
* Il est seulement produit en 2,5 L.

Quantité d’application:

  • 6-7 m2 de surface peinte en deux couches avec 1l

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Thoroughly clean the generated dust.

Application:

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 coats by brush and wait 24 hours between coats.
  • Perform a slight sanding with sandpaper #180/220 between coats.
  • Wait 24 hours for complete dry.
  • Apply in the direction of wood grain to get a homogeneous look.

Maintenance (when the same product had been used before):

  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application” with 1 or 2 coats depending on weathering.
  • Inspect annually and maintain as required.

Instructions:

  • FOR EXTERIOR USE ONLY.
  • NOT SUITABLE FOR FLOORINGS.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be max. 20%.
  • Do not apply the product under direct sunlight or rain.
  • Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Plus Wood Stain applied surfaces.
  • To provide a long lifetime protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying Hickson Decor® Plus Wood Stain.
  • The product should be stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with mineral spirits after the application.

Safety Precautions:

  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.