HEMEL® Timbercare Aqua

Imprégnant à base d'eau appliqué avec une brosse qui empêche la corrosion du bois
Bois à texture douce tel que le pin etc. à peindre au niveau du sol.- Efficace contre les vers et les champignons
- Application facile avec le pinceau
- Incolore
- Inodore
- Conforme aux normes européennes
- Respectueux de l'environnement
- Prêt à l’emploi
*,**-TL / 1 lt + VAT
**,**-TL / 5 lt + VAT
**,**-TL / 20 lt + VAT
Find a Store
Caractéristiques générales :
- Efficace contre les vers et les champignons
- Application facile avec le pinceau
- Incolore
- Inodore
- Conforme aux normes européennes
- Respectueux de l'environnement
- Prêt à l’emploi
Domaines d'utilisation :
- Bois à texture douce tel que le pin etc. à peindre au niveau du sol
Emballage:
- 1 L.
- 5 L.
- 20 L.
Ce produit est incolore et n'a pas de nuancier.
Pour des informations techniques détaillées et un soutien, veuillez contacter HEMEL.
Hemel Products Catalogue
Hemel_Product_Catalogue.pdfSDS-HEMEL Timbercare Aqua
SDS-HEMEL-Timbercare-Aqua.pdfTDS-HEMEL Timbercare Aqua-en
TDS-HEMEL-Timbercare-Aqua-en.pdfQuantité d'application :
- La surface de 4-5 m2 est trempée avec 1 L.
Surface Preparation:
- Timber surface must be completely clean and moisture content of the wood should be below 20%.
Application:
- The product is ready to use and does not require thinning/
- Apply the product on timber by brush until it gets completely wet.
- Wait 24 hours for complete dry before coating.
Instructions:
- FOR INTERIOR/EXTERIOR USE.
- HARMFUL FOR BEES.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- The moisture content of the wood should be max. 20%.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.