Hickson Decor® Aqua Industrial - Varnish

Vernis bois industriel à base d'eau pour l'extérieur
- Transparent
- Hydrofuge
- Respire, évacue l’humidité du bois
- Application avec pistolet (VA 1130) ou pinceau (VA 1030)
- Résistant à la lumière du soleil (UV) (lorsqu'il est utilisé avec la couleur SA 11XX)
- Applicable à la verticale
- Ne s’écaille pas, ne gonfle pas et ne se fissure pas
- Sans plomb
- Respectueux de l'environnement
- Prêt à l’emploi
**,**-TL / 15 lt + VAT
Industrial Usage
Find a Store
Caractéristiques générales:
- Transparent
- Hydrofuge
- Respire, évacue l’humidité du bois
- Application avec pistolet (VA 1130) ou pinceau (VA 1030)
- Résistant à la lumière du soleil (UV) (lorsqu'il est utilisé avec la couleur SA 11XX)
- Applicable à la verticale
- Ne s’écaille pas, ne gonfle pas et ne se fissure pas
- Sans plomb
- Respectueux de l'environnement
- Prêt à l’emploi
Domaines d'utilisation:
- Toutes les boiseries extérieures exceptées le plancher
- Cadres de portes et fenêtres
- Volets
- Revêtements de façade
- Clôtures
- Pergolas
- Garde-corps de balcon
- Avant-toit
Emballage:
- 15 L.
Ce produit est incolore et n'a pas de nuancier.
Hemel Products Catalogue
Hemel_Product_Catalogue.pdfSDS-Hickson Decor® Aqua Industrial-Varnish
SDS-Hickson-Decor-Aqua-Industrial-Varnish.pdfTDS-Hickson Decor® Aqua Industrial-Varnish
TDS-Hickson-Decor-Aqua-Industrial-Varnish-en.pdfEN71-3 Toy Safety Certificates - Hickson Decor® Wood Stain Endustriyel-Varnish - Brush
EN71-3-Hickson-Decor-Wood-Stain-Endustriyel-Cila-Firca-VA-1030.pdfEN71-3 Toy Safety Certificates - Hickson Decor® Wood Stain Endustriyel-Varnish -
EN71-3-Hickson-Decor-Wood-Stain-Endustriyel-Cila-Tabanca-VA-1130.pdfQuantité d’application:
- 3-4 m2 de surface vernie en deux couches avec 1L.
Surface Preparation:
- Before applying the product, wait 4-6 hours for Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain applied surface to dry.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- Apply the product in 2 coats by brush or spray gun (2,5-3 mm nozzle, min. 3 atm pressure) on Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain applied surface without sanding (wet on wet) and wait 1,5-2 hours between coats.
- For any reason, if 3 hours exceeded between coats, wait 24 hours and sand the surface with #220/240 sandpaper before applying the second coat.
- Wait 24 hours for complete dry.
- For the best result, slight sanding between coats is advised.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a slight sanding.
- Thoroughly clean the generated dust.
- Repeat same process as described in “Application”.
- Inspect annually and maintain as required.
Instructions:
- FOR EXTERIOR USE ONLY.
- NOT SUITABLE FOR FLOORINGS.
- To achieve UV protection, must be applied on Hickson Decor® Aqua Industrial-Stain or HEMEL Universal Stain.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- The moisture content of the wood should be max. 20% for exterior.
- Do not apply the product under direct sunlight or rain.
- Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Aqua Industrial-Stain applied surfaces.
- Wait 72 hours before packaging coated/finished goods.
- The same product can be purchased in 2,5 L. cans as HEMEL Varnish for Exterior.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.