HEMEL® Varnish for Interior

Vernis bois intérieur transparent à base d'eau
- Incolore
- Inodore
- Maintient la beauté naturelle du bois
- Sans plomb
- Respectueux de l’environnement
- Prêt à l’emploi
Find a Store
Caractéristiques Générales:
- Incolore
- Inodore
- Maintient la beauté naturelle du bois
- Sans plomb
- Respectueux de l’environnement
- Prêt à l’emploi
Domaines d’utilisation:
- Zemin dışındaki tüm Intérieur ahşaplar için uygundur
- Lambris
- Plafond en bois
Emballage:
- 0.750 L.
- 2.5 L.
- 15 L. (Produit sur commande)
Ce produit est transparent et n’a pas de nuancier.
Utiliser HEMEL Universal Stain (utiliser le colorant intérieur / extérieur) pour colorer les boiseries.
Hemel Products Catalogue
Hemel_Product_Catalogue.pdfSDS-HEMEL Varnish for Interior
SDS-HEMEL-Varnish-for-Interior.pdfTDS-HEMEL Varnish for Interior
TDS-HEMEL-Varnish-for-Interior-en.pdfEN71-3 Toy Safety Certificate - HEMEL Varnish for Interior
EN71-3-HEMEL-Varnish-for-Interior.pdfQuantité d’application:
- Avec 1 L. en 2 couches 7-8 m2 de surface vernie
Surface Preparation:
- Remove any dirt, oil and wood dust from the surface.
- If HEMEL Universal Stain or Hickson Decor® Aqua Industrial-Stain is applied, wait 4-6 hours for complete dry.
- Sand the surface with sandpaper #180/220.
- Thoroughly clean the generated dust.
- Do not apply the product directly on pre-coated surfaces.
- Remove the old paint/varnish from the surface completely with a sandpaper.
- Thoroughly clean the generated dust.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- Apply the product in 2 coats by brush or roller and wait 1,5-2 hours between coats.
- Perform a slight sanding with sandpaper #180/220 between coats.
- Wait 24 hours for complete dry.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a slight sanding.
- Thoroughly clean the generated dust..
- Repeat same process as described in “Application” with 1 or 2 coats depending on wearing.
- Inspect annually and maintain as required.
Instructions:
- FOR INTERIOR USE ONLY.
- NOT SUITABLE FOR FLOORINGS.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- The moisture content of the wood should be max. 20%.
- Do not apply the product under direct sunlight or rain.
- Do not apply linseed oil, basecoat/primer, yacht varnish before or after HEMEL Varnish for Interior applied surfaces.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
- OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.