To
Top

HEMEL® Wood Oil 2C

Huile naturelle bi-composant pour tout le bois d'intérieur

  • Protection en une seule couche
  • Ne forme pas une couche de pellicule
  • Maintient la beauté naturelle du bois
  • Résistant à l’abrasion et aux rayures
  • Kat izi oluşturmaz
  • Hydrofuge
  • Respectueux de l’environnement (%0 VOC)
 

 
Find a Store
 
 
 
 
 

Caractéristiques Générales:

  • Protection en une seule couche
  • Ne forme pas une couche de pellicule
  • Maintient la beauté naturelle du bois
  • Résistant à l’abrasion et aux rayures
  • Kat izi oluşturmaz
  • Hydrofuge
  • Respectueux de l’environnement (%0 VOC)

Domaines d’utilisation:

  • Parquets massifs ou stratifiés
  • Toutes les surfaces intérieures en bois massif et plaqué
  • Tables massives ou plaquées, chaises, comptoirs de cuisine et ameublement

Emballage Boyutları:

  • 250 ml. Partie A + 50 ml. Partie B
  • 0,750 L. Partie A + 0,150 L. Partie B
  • 2,5 L. Partie A + 0,5 L. Partie B
  • Noir

    Noir

  • Bleu Gris

    Bleu Gris

  • Marron Brun

    Marron Brun

  • Craie Blanche

    Craie Blanche

  • Chocolat

    Chocolat

  • Clair

    Clair

  • Chêne foncé

    Chêne foncé

  • Couleur Anglaise

    Couleur Anglaise

  • Gris clair

    Gris clair

  • Acajou

    Acajou

  • Naturel

    Naturel

  • Super Blanc

    Super Blanc

 

Quantité d’application:

  • 30 m2 (peut varier selon le type de de bois et la méthode d’application)

Surface Preparation:

  • Remove any dirt, oil and wood dust from the surface.
  • Do not use products like cellulose or polyurethane filler or primer before the application of the product. As a filler, mix the wood dust with the product and fill all gaps and joints of the parquet. Clean the excess paste after it has dried out.
  • Untreated Wooden Surfaces:
    • Sand the surface according to the desired surface appearance.
    • Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
    • Remove the remaining dust with a damp cloth.
  • Oiled Wooden Surfaces:
    • Remove the remaining dust with a damp cloth.
  • Old Uncoated Wooden Surfaces:
    • Sand the weathered surface according to the desired surface appearance.
    • Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
    • Remove the remaining dust with a damp cloth.
  • Varnished Wooden Floors:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old varnish from the parquet completely with a scraping machine. Remove any dirt, oil, wood dust and old varnish residues from the surface.
    • Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
    • Remove the remaining dust with a damp cloth.

Application:

  • The product is used as two components with hardener.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Add the hardener by %20 and stir the product by a spatula or stick. The container used should be dry and clean.
  • The mixture should be applied within 4-6 hours.
  • Manual Application:
    • Apply the mixture along the edges for floorings.
    • Apply the mixture in 1 coat by a brush or cloth in zones of 5 m2 and leave 15 minutes for penetrating the oil. Thoroughly remove the excess oil by cloth within 15 minutes per zone till surface feels dry.
    • Apply in the direction of wood grain to get a homogeneous look.
  • Machine Application:
    • Apply the mixture along the edges for floorings.
    • Use polishing machine with red buffer pad for leveling the product to the surface.
    • Pour a quantity product to surface or buffer pad’s hollow and apply in zones of 5-10 m2. Leave 15 minutes for penetrating the oil. Thoroughly remove the excess oil by white buffer pad within 15 minutes per zone till surface feels dry.
    • Apply in the direction of wood grain to get a homogeneous look.
  • The treated surface may be stepped on after 24 hours.
  • Allow 7 days for full cure.

Instructions:

  • FOR INTERIOR USE ONLY.
  • Do not apply products such as nitro, polyurethane basecoats or primers before HEMEL Wood Oil 2C.
  • Keep product closed when not in use.
  • The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
  • The moisture content of the wood should be below 12%.
  • The area should be ventilated during and after the application to promote the drying.
  • ÜThe product should not be applied when the weather or surface temperature is below 10°C.
  • The floor should not be cleaned with ammonia containing cleaning materials.
  • The varnished floor can be stepped on after 24 hours. Allow 7 days before spreading carpet and/or cleaning.
  • The product should be stored at temperatures between 5°C to 35°C.
  • Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

  • OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
  • USE WITH ADEQUATE VENTILATION.
  • KEEP OUT OF REACH OF CHILDREN.
  • Do not transfer contents to other containers for storage.
  • Do not use empty plastic cans for other purposes.
  • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
  • Avoid contact with eyes and skin.
  • Wash hands after using.
  • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
  • Dispose of contents/plastic cans in accordance with national regulations.
  • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.