HEMEL® Exotic Oil

Натуральное масло цветное для деревянных поверхностей наружных помещений, садовой мебели, жестких пород дерева, ThermoWood®
- Сохраняет естественную красоту дерева
- Не создает на поверхности слой пленки
- Устойчив против солнечного света (УФ-лучей)
- Обеспечивает локальный уход за изношенными зонами
- Водоотталкивающий
- Снижает образование древесных осколков
- Без свинца
- Готов для применения
**,**-TL /0,75 lt+ VAT
**,**-TL /2,5 lt+ VAT
**,**-TL /15 lt*+ VAT
Find a Store
Общие характеристики:
- Сохраняет естественную красоту дерева
- Не создает на поверхности слой пленки
- Устойчив против солнечного света (УФ-лучей)
- Обеспечивает локальный уход за изношенными зонами
- Водоотталкивающий
- Снижает образование древесных осколков
- Без свинца
- Готов для применения
Область применения:
- Жесткие породы дерева, ThermoWood ®, деревянные покрытия, садовая мебель
Упаковка:
- 2,5 л
- 15 л (изготовляется под заказ)
-
Natural
-
Mustard
-
Hazelnut
-
Brown
Внимание:
Возможно самовозгорание полностью пропитанной маслом тряпки. После использования, необходимо полностью намочить тряпку водой и затем выбросить.
HEMEL® Products Catalogue
Hemel_Product_Catalogue.pdfSDS-HEMEL® Exotic Oil
SDS-HEMEL-Exotic-Oil.pdfTDS-HEMEL® Exotic Oil
TDS-HEMEL-Exotic-Oil-en.pdfEN71-3 Toy Safety Certificate - HEMEL® Exotic Oil
EN71-3-HEMEL-Exotic-Oil.pdfИспользуемое количество:
- 1 л при мягких породах дерева покрывается 8-10 м2, жестких породах дерева 15-18 м2
Surface Preparation:
- Remove any dirt, oil and wood dust from the surface.
- Sand the surface with sandpaper #80/120.
- Thoroughly clean the generated dust.
- Sand the weathered surface with sandpaper #80/120 or restore wood surface using HEMEL® DeckRestorer.
- Do not apply the product directly on pre-coated surfaces.
- Remove the old paint/varnish from the surface completely with a sanding machine.
- Thoroughly clean the generated dust.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- Apply the product in 1 coat by a brush, roller or dipping and remove the excess oil by brush for the best result.
- Apply in the direction of wood grain to get a homogeneous look.
- The treated surface may be stepped on after 24 hours.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a slight sanding.
- Thoroughly clean the generated dust.
- Repeat same process as described in “Application”.
- Maintenance should be repeated every season.
Instructions:
- FOR EXTERIOR USE ONLY.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- The moisture content of the wood should be max. 20%.
- Do not apply the product under direct sunlight or rain.
- The product should be stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with mineral spirits after the application.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.