Hemel Exotic Oil Mustard
Shipping
Shipping
-
General Features
- Beautiful natural finish
- Non-film forming
- Increased resistance to UV Resistant
- Water repellent
- Easy maintenance of local patches
- Reduces splintering
- Child safe (EN 71-3 Certified)
- Ready to use
Where to use- Hardwoods, ThermoWood®, decks, and garden furniture
Packaging- 2,5 L.
- 15 L.
Exterior use onlyApply with brush or rollerStir well before use1 Lt covers 10-18 m2Does not crack or blister.
Warning: The colors shown here are applied on oak and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used. Tips
THERE IS A RISK OF SELF-FLAMMING IN LUBRICATED CLOTH. AFTER USE, THE CLOTHES MUST BE DISPOSED OF AFTER COMPLETELY WETTED WITH WATER.
The application method and quantities specified in the Technical Data Sheet of the product should be followed while applying.
For the care of your garden furniture, apply the product in 1 coat with a brush, cloth, or roller, and remove the excess oil by brushing. If there is too much product left on the surface, it forms a film layer, dries too late, does not provide a homogeneous appearance, and retains ambient dust.
For the care of your wooden decks, you can use the product with a brush, cloth, roller, or dip in the wood.
Apply 1 or 2 layers according to its absorbency, remove the excess oil by brushing. Allow at least 24 hours between coats. If there is too much product left on the surface, it forms a film layer and the product dries too late; It does not provide a homogeneous appearance, retains ambient dust, and shows footprints.
Apply in the direction of the grain in the wood to achieve a homogeneous appearance.
The application surface can be stepped on after 24 hours.
The moisture content of the wood to be applied should be no more than 20%.
Impregnation for protection of softwood against mildew, fungi, and pests
The application should be made.
It is also recommended to apply 1 layer of product on the back surfaces to increase the service life of your wood decks.
In sanding operations under sanding 150-180 grit, the opening of the cells on the surface of the wood will increase. As a result, consumption increases in soft textured wood, and wood retains more dust in floor applications.
Frequently Asked Questions
Which product should I choose over heat-treated decks like ThermoWood®?
For outdoor ThermoWood® decks, HEMEL Exotic Oil can be preferred in 2 coats.
What is the difference between HEMEL Deck Oil and HEMEL Exotic Oil? According to what should I choose?
HEMEL Exotic Oil is specially developed for hardwood and ThermoWood® deck floors.
It is a seasonal oil. It is odorless. Complete scraper on your wood for renovation
- You do not need to perform operations, maintenance is very easy. HEMEL Deck Oil should be preferred when a service life of up to 1-2 years and durability is required on all wooden floors for longer-term protection and especially for softwoods.
Can I also use HEMEL Exotic Oil products on the front?
HEMEL Exotic Oil can be used on the front. If they are applied to vertical surfaces, the maintenance time is longer than on floors. But paint performance should not be expected from such oil-based products.
There's paint on the deck that's been rubbed before. Can I use Hemel Exotic Oil without any action on it?
Painted or polished surfaces should be completely cleaned and the products should be applied to the raw wood surface.
Can I use the product in 2-3 coats?
HEMEL Exotic Oil is a product that you can use in 1 or 2 coats. Care should be taken to wipe off the excess oil on the surface after each coat application.
If you are going to apply 2 coats of oil-based products, you don't need to do a sanding between coats.
The waiting time between the coats in the second layer applications with oil-based products is 24 hours. When using 3 coats, there will be a lot of product on the surface, so a film layer may be formed. Film formation on the surface is undesirable on deck floors,
Therefore, it is not recommended to use 3 coats.
Which product should I use for outdoor picnic tables?
The most suitable products for this area of use are HEMEL Exotic Oil or transparent HEMEL Teak Oil. Since the absorbency is higher in pine and similar softwoods, we recommend that you use these products in 2 coats. If you just want to color the table, Hickson Decor
You can use Aqua Decorative Colorant.
What should I use in garden furniture?
For your garden furniture, you can use colored HEMEL Exotic Oil or transparent HEMEL Teak Oil. Since colored oils such as HEMEL Exotic Oil contain special pigments developed against sunlight, their service life is longer than transparent oils.
How should I maintain outdoor seating groups?
If there is paint or varnish on the surface, you should clean the surface completely with sandpaper. If it is unpainted or unvarnished, the wooden surface should be cleaned with HEMEL Deck Restorer as the first treatment, then you can complete the maintenance process applying HEMEL Teak Oil or colored HEMEL Exotic Oil according to your preference.
If you want a smooth surface, you can sand the surface after the Deck Restorer application.
How can I maintain my teak table?
You can maintain your table by applying HEMEL Teak Oil or HEMEL Exotic Oil.
What product would you recommend for the sea pier that will protect the wooden floor from seawater?
We recommend applying HEMEL Deck Oil or HEMEL Exotic Oil according to wood type and preferred characteristics.
I want to build a wooden ladder, which product would you recommend on it?
We recommend using HEMEL Deck Oil on your outdoor wooden stairs.
If seasonal maintenance is not a problem for you, you can apply it in HEMEL Exotic oil. On your indoor stairs, you can use our water-based parquet polishes or our oil-based HEMEL Wood Oil 2C.
What does natural oil mean?
Many oils such as petroleum derived oils (naptha oil), polymerized oils and natural oils are used in paints and industries. The natural oils mentioned here refer to oils derived from vegetable products such as linseed, Tung fruit, soy and cotton.
Problems and solutions
Spontaneous flame of the cloths used in Hemel Deck oil application
Causes Of The Problem:
- Disposal of used cloth without wetting them.
Solution:
In cases where cloth, sponge, felt, etc. products are used when applying to oil-based products,
there is a possibility that the materials used may spontaneously flare-up, especially in hot
weather. To avoid this, these materials that come into contact with oil, after use should be
completely wetted with water and then disposed of.
Failure to clean footprints and/or dust on the product applied floor despite mopping
Causes of the Problem:
- It is caused by the application of the product thickly on the surface or not removing the
excess oil by wiping it with a cloth or brush.
Solution:
- To eliminate the problem, a complete scraper should be applied to the floor and re-application
should be made.
The product does not dry out
Causes of the Problem:
- Applying more oil than required to be applied to the surface
- Not removing the excess oil applied to the surface by combing with a cloth or brush.
- The moisture of the treated wood is more than 20%
Solution:
- If the excess oil applied to the surface is still not dried enough to be combed, the excess oil on the surface should be removed by combing with a brush.
- If the surface is dried enough not to be combed, the surface should be scrubbed after waiting for complete drying and the application should be repeated.
Creating a wavy appearance on the surface after applying Hemel Deck Oil
Causes of the Problem:
- It is caused by the application on the surface more than it should be applied, and the excess oil being applied not to be wiped off with a cloth or brush.
- It is caused by uneven ground because the sanding is not made correctly.
Solution:
- The operations under the title of "Causes of the Problem" should be checked and the application should be repeated by removing the conditions that cause it.
-
Coverage:
- 1 L. covers 10-12 m² on softwoods and 15-18 m² on hardwoods
Surface Preparation:
- Remove any dirt, oil, and wood dust from the surface.
-New Wood Surfaces:
- Sand the surface with sandpaper #150/180.
- Thoroughly clean the generated dust.
-Old Uncoated Wood Surfaces:
- Sand the weathered surface with sandpaper #150/180 or restore the wood surface using HEMEL Deck Restorer.
-Coated Wood Surfaces:
- Do not apply the product directly on pre-coated surfaces.
- Remove the old paint/varnish from the surface thoroughly with a sanding machine.
- Thoroughly clean the generated dust.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- -Garden furniture:
- Apply the product in 1 coat by a brush or roller and remove the excess oil by brush for the best result.
- -Deck:
- Apply the product by brush, cloth, roller, or dipping in 1 or 2 coats according to absorption of the wood and remove the excess oil by brush for the best result.
- Wait at least 24 hours between the coat.
- Apply in the direction of the wood grain to get a homogeneous look.
- The treated surface may be stepped on after 24 hours.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface entirely from dirt and oil and perform a light sanding.
- Thoroughly clean the generated dust.
- Repeat the same process as described in Application.
- Maintenance should be carried out every season.
Instructions:
- FOR EXTERIOR USE ONLY.
- Keep the product closed when not in use.
- The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
- The moisture content of the wood should max 20%.
- Do not apply the product under direct sunlight or rain.
- To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
- The product should be stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with mineral spirits after the application.
-
Safety Precautions:
- WARNING: OIL SOAKED CLOTH USED FOR THE APPLICATION CAN BE SELF-IGNITING. CLOTH SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
-
The meaning of deck is the wooden floor used as outdoor parquet, floor covering. When choosing a deck, hardwoods that will be compatible with the weather conditions caused by the outdoor area should be preferred. If we list the properties of the decks, natural wood, environmentally friendly, compatible with human health, giving a pleasant appearance, adding a warm atmosphere to the environment, long life, resistance to external factors, easy to clean and maintain, and low slippery.
What does decking oil do?
Decking oil ensures the deck to have a thick, strong surface and also prevents getting damaged from impacts, and having a natural color of the wood. It is very important to use decking oils in the production and maintenance of all wooden floors. When natural decking oil is applied, the deck surface is protected against water and moisture, is prevented from deteriorating. Decking oil adds water repellency to wood and also creates a shield against dust, nail polish, alcohol, and many other similar substances. It prevents the surfaces from being damaged by acidic beverages or foods if acidic beverages are accidentally brought into contact with the wooden surface. Decking oil has a flexible property and prevents the wood from being affected as long as the wood is solid.
Most importantly, it protects the wooden deck surface against sunlight.
With natural oils colored with different color options, you can paint your wood as you wish while protecting your wood. We can give examples of wooden floors that we call decks such as pool sides, piers, sunbathing areas, balconies, terraces, walking tracks, playgrounds, beach/pool changing rooms, pergola/gazebo floors, yacht decks, flower pot organizers, and garden furniture. Maintenance of decks that are constantly exposed to the sun and in contact with water and protection with natural oil against sunlight extends the service life and ensures that the wood preserves its natural beauty.
Which decking oil, deck paint should be used?
There is a wide variety of decking oils on the market, but if you want to get an effective and safe result, you should choose deck oil that doesn’t contain heavy metals, lead-free, and complying with the EN 71-3 standard. After cleaning the unpainted/unpolished, grayed, or worn decks with HEMEL® Deck Restorer, you can color your deck floors, garden furniture exposed to sunlight, with 5 different color options of HEMEL® Deck Oil. You can get your furniture under extra protection against UV rays with HEMEL® Exotic Oil, which has 4 different color options and colored natural oil for deck care, you can also perform regional maintenance on the worn deck surface, you can think of it as a deck paint. If you are looking for deck care oil that is water-repellent, reduces splinter formation, preserves its natural beauty while coloring the wood, and does not form a film layer, Hemel products are right for you! See wonderful color scales such as antique pine color, walnut color, light oak, and get detailed information!
How is decking oil applied?
Colored natural decking oil can be applied to wooden floors by brush, cloth, roller, or dipping methods. There are various decking oil colours.
-
1,899.90 TL
-
1,899.90 TL
-
1,899.90 TL