HEMEL

Hemel FR Fire Retardant Solution

Water-based transparent fire retardant solution
Campaign
  • Features
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Slows the spread of flame
    • Can be applied on surfaces such as solid wood, MDF,
      and chipboard
    • Clear
    • Odorless
    • Versatile application with brush/roller/dip
    • Environmentally friendly
    • Ready to use
    Where to use
    • All exterior and interior wooden surfaces except floors
    Packaging

    • 5 L.
    • 20 L.
    Exterior/Interior use
    Apply with brush, roller or dipping
    Stir well before use
    1 Lt covers 4-5 m2



  • PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) Certification

  • •Coverage:

    • 1 L. covers 4-5 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.
    • Do not use any filler or primer products, such as cellulosic, polyurethane, etc., before applying the product

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • For best results on interior and exterior wood except floors, apply one coats with a roller, brush
      or dipping and brush off excess oil.
    • Apply the solution at a rate of 200-250 grams of product per square meter.
    • Apply solvent or oil-based finish over the solution as a topcoat. Do not use in combination
      with water-based products.
    • For a homogeneous surface appearance before the top coat, sand with 180/220 grit sandpaper
      and remove dust thoroughly.

    •Instructions:

    • FOR INTERIOR OR EXTERIOR USE EXCEPT FLOORS.
    • Not to be used as a topcoat, no protection when used alone.
    • Ensure that the product is completely dry before applying solvent or oil-based finish.
    • In order for the certificate standard and documents to be valid, the application conditions specified in the Technical Data Sheet must be complied with.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.

  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Features
    General Features
    • Slows the spread of flame
    • Can be applied on surfaces such as solid wood, MDF,
      and chipboard
    • Clear
    • Odorless
    • Versatile application with brush/roller/dip
    • Environmentally friendly
    • Ready to use
    Where to use
    • All exterior and interior wooden surfaces except floors
    Packaging

    • 5 L.
    • 20 L.
    Exterior/Interior use
    Apply with brush, roller or dipping
    Stir well before use
    1 Lt covers 4-5 m2



    • Yorumlar (0)
  • FAQ
  • Document

    PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) Certification
  • Application

    •Coverage:

    • 1 L. covers 4-5 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.
    • Do not use any filler or primer products, such as cellulosic, polyurethane, etc., before applying the product

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • For best results on interior and exterior wood except floors, apply one coats with a roller, brush
      or dipping and brush off excess oil.
    • Apply the solution at a rate of 200-250 grams of product per square meter.
    • Apply solvent or oil-based finish over the solution as a topcoat. Do not use in combination
      with water-based products.
    • For a homogeneous surface appearance before the top coat, sand with 180/220 grit sandpaper
      and remove dust thoroughly.

    •Instructions:

    • FOR INTERIOR OR EXTERIOR USE EXCEPT FLOORS.
    • Not to be used as a topcoat, no protection when used alone.
    • Ensure that the product is completely dry before applying solvent or oil-based finish.
    • In order for the certificate standard and documents to be valid, the application conditions specified in the Technical Data Sheet must be complied with.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
    • Öneri Kutusu
Prepared by  T-Soft E-Commerce.