HEMEL

Hemel Marine Universal Stain HD 2011

Water-based translucent penetrating wood dye for boat wooden surfaces
519.90 TL
Ücretsiz Kargo Free
Shipping
Hızlı Kargo Fast
Shipping
Select Color:

HD 2011

HD 2011
Select Packaging:

0,75
5 L. and over packaging options are available at stores
Select Quantity:
Installment Plan
Free Shipping
Fast Shipping
Returns
Installment Plan
If you are an Axess, Bonus, Maximum, or World Cardholder, you can complete your order with the advantage of 2, 3, or 6 installments without interest.
Free Shipping
Free shipping for orders above 20 EUR. For orders less than 20,00 EUR, a shipping fee of 6,00 EUR will be charged.
Fast Shipping
If you order the products that have the “Fast Shipping” logo until 12:00, they will be shipped on the same day. Shipments are not made on Saturday, Sunday, and public holidays.
Returns
If you return your purchased products in their unopened and original packaging, you can return them unconditionally within the first 14 days. This applies only to the Turkish market. International orders are non-refundable.
Campaign
  • Features
  • Payment Options
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Natural look
    • Rich pigmented colors
    • Applied by brush, cloth, and dipping
    • Ready to use
    Where to use
    • Interior/exterior wooden surfaces of boats above sea level
    Packaging

    • 0,750 L.
    Exterior/Interior
    Fırça İle Uygulanır
    Apply with brush, cloth, and dipping
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 10-12 m2


    Warning:     The colors shown here are applied on pine and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

  • 0

  • PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)

  • •Coverage:

    • 1 L. covers 10-12 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface thoroughly with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by brush, cloth, or dipping and wait 4-6 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • At sweltering weather, you may add HEMEL Stabilizer by 2-3% to extend the open time (drying time).
    • For interior use decorative finish, apply HEMEL Ultramat as a topcoat, for exterior use, UV protection, and decorative finish, apply HEMEL Yacht Varnish as a topcoat.

    •Maintenance (when the same product had been used before):

    • Do not apply the product on pre-coated surfaces.
    • Remove the old stain/varnish from the surface thoroughly with sandpaper.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in “Application.”
    • Inspect annually and maintain as required.

    •Instructions:

    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20% for the exterior use.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, yacht varnish before or after HEMEL Universal Stain applied surfaces.
    • To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.

  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Features
    General Features
    • Natural look
    • Rich pigmented colors
    • Applied by brush, cloth, and dipping
    • Ready to use
    Where to use
    • Interior/exterior wooden surfaces of boats above sea level
    Packaging

    • 0,750 L.
    Exterior/Interior
    Fırça İle Uygulanır
    Apply with brush, cloth, and dipping
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 10-12 m2


    Warning:     The colors shown here are applied on pine and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Finish
    :
    Semi-transparent
    Type
    :
    Water-based
    Where to use
    :
    Marine
  • Payment Options
    General Features
    • Natural look
    • Rich pigmented colors
    • Applied by brush, cloth, and dipping
    • Ready to use
    Where to use
    • Interior/exterior wooden surfaces of boats above sea level
    Packaging

    • 0,750 L.
    Exterior/Interior
    Fırça İle Uygulanır
    Apply with brush, cloth, and dipping
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 10-12 m2


    Warning:     The colors shown here are applied on pine and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Finish
    :
    Semi-transparent
    Type
    :
    Water-based
    Where to use
    :
    Marine
    • Yorumlar (0)
  • FAQ
  • Document

    PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
  • Application

    •Coverage:

    • 1 L. covers 10-12 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface thoroughly with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by brush, cloth, or dipping and wait 4-6 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • At sweltering weather, you may add HEMEL Stabilizer by 2-3% to extend the open time (drying time).
    • For interior use decorative finish, apply HEMEL Ultramat as a topcoat, for exterior use, UV protection, and decorative finish, apply HEMEL Yacht Varnish as a topcoat.

    •Maintenance (when the same product had been used before):

    • Do not apply the product on pre-coated surfaces.
    • Remove the old stain/varnish from the surface thoroughly with sandpaper.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in “Application.”
    • Inspect annually and maintain as required.

    •Instructions:

    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20% for the exterior use.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, yacht varnish before or after HEMEL Universal Stain applied surfaces.
    • To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
    • Öneri Kutusu
Prepared by  T-Soft E-Commerce.