HEMEL

Hemel Marine Yacht Varnish

Solvent-based high gloss premium quality yacht varnish
Campaign
  • Features
  • Comments (1)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Clear
    • High-gloss
    • Elastic
    • Perfect leveling
    • Increased resistance to UV
    • Water-repellent
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Solid wood and plywood for both inside and outside of boats above the waterline
    • Suitable for all exterior wood except floors
    • Claddings
    Packaging
    • 0,750 L.
    • 2,5 L.
    • 15 L. (Upon request)
    Dış Mekan İçindir
    Exterior
    Zeminde Uygulanmaz
    Not to be applied on decks/floors.
    Uv Dirençli
    Uv Resistant
    Fırça İle Uygulanır
    Apply with brush
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 12-14 m2
  • 0

  • PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) EN71-3 Toy Safety Certificate
  • Coverage:
    • 1 L. covers 12-14 m²

    Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    New Wood Surfaces:

    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Old Uncoated Wood Surfaces:

    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Coated Wood Surfaces:

    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity.
    • Apply the product in 3 coats by brush and wait 24 hours between coats.
    • Perform a slight sanding with sandpaper #180/220 between coats.
    • Wait 24 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.

    Maintenance (when the same product had been used before):

    • Do not apply the product directly on pre-coated surfaces.
    • Clean the wood surface completely from dirt and oil and perform a light sanding.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in “Application” with 1 or 2 coats depending on weathering.
    • Inspect annually and maintain as required.

    Instructions:

    • FOR EXTERIOR USE ONLY.
    • NOT SUITABLE FOR FLOORINGS.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer before or after product coated surfaces.
    • To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
    • The product should be stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with mineral spirits after the application.

  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Features
    General Features
    • Clear
    • High-gloss
    • Elastic
    • Perfect leveling
    • Increased resistance to UV
    • Water-repellent
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Solid wood and plywood for both inside and outside of boats above the waterline
    • Suitable for all exterior wood except floors
    • Claddings
    Packaging
    • 0,750 L.
    • 2,5 L.
    • 15 L. (Upon request)
    Dış Mekan İçindir
    Exterior
    Zeminde Uygulanmaz
    Not to be applied on decks/floors.
    Uv Dirençli
    Uv Resistant
    Fırça İle Uygulanır
    Apply with brush
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 12-14 m2
    Weight (Kg)
    :
    0
    Features
    Finish
    :
    Clear
    Type
    :
    Solvent-based
    Where to use
    :
    Marine
    • Yorumlar (1)
  • FAQ
  • Document

    PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) EN71-3 Toy Safety Certificate
  • Application
    Coverage:
    • 1 L. covers 12-14 m²

    Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    New Wood Surfaces:

    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Old Uncoated Wood Surfaces:

    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Coated Wood Surfaces:

    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity.
    • Apply the product in 3 coats by brush and wait 24 hours between coats.
    • Perform a slight sanding with sandpaper #180/220 between coats.
    • Wait 24 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.

    Maintenance (when the same product had been used before):

    • Do not apply the product directly on pre-coated surfaces.
    • Clean the wood surface completely from dirt and oil and perform a light sanding.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in “Application” with 1 or 2 coats depending on weathering.
    • Inspect annually and maintain as required.

    Instructions:

    • FOR EXTERIOR USE ONLY.
    • NOT SUITABLE FOR FLOORINGS.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer before or after product coated surfaces.
    • To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
    • The product should be stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with mineral spirits after the application.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
    • Öneri Kutusu
Prepared by  T-Soft E-Commerce.