Hemel Rapid Oil - Blanco

•Cobertura:

• 1 L. cubre 8-10 m2 con dos capas 1 L. covers 8-10 m² 

•Preparación de Superficies: (Exterior):

• Quite la suciedad, el aceite y el polvo de madera de la superficie.

-Nuevas Superficies de Madera (Exterior):

• Lije la superficie con papel de lija #80/120.

• Limpie a fondo el polvo generado.

-Superficies De Madera Viejas Sin Revestimiento: (Exterior):

• Lije la superficie desgastada con papel de lija #150/180 o restaure la superficie de madera con HEMEL Deck Restorer.

• Limpie a fondo el polvo generado.

-Superficies de Madera Recubiertas (Exterior):

• No aplique el producto directamente sobre superficies previamente recubiertas.

• Retire la pintura/barniz viejo de la superficie completamente con papel de lija.

• Limpie a fondo el polvo generado.

Preparación de la superficie (Exterior):

• Quite la suciedad, el aceite y el polvo de madera de la superficie.

-Nuevas Superficies de Madera: (Exterior):

• Lije la superficie con papel de lija #150/180.

• Limpie a fondo el polvo generado.

-Superficies De Madera Viejas Sin Revestimiento:  (Exterior):

• Sand the weathered surface with sandpaper #150/180 or restore the wood surface using HEMEL Deck Restorer.

-Coated Wood Surfaces (Exterior):

• Do not apply the product directly on pre-coated surfaces.

• Remove the old paint/varnish from the surface thoroughly with a sanding machine.

• Thoroughly clean the generated dust.

•Surface Preparation (Interior):

• Remove any dirt, oil, and wood dust from the surface.

• Do not use products like cellulose or polyurethane filler, or primer before applying the product. As a filler, mix the wood dust with the product and fill all gaps and joints of the parquet. Clean the excess paste after it has dried out.

-New Wooden Surfaces (Interior):

• Clean the surface thoroughly.

• Sand the surface with a parquet sanding machine or hand using sandpaper #120/150.

• Clean the generated dust thoroughly and remove it from the surface with a vacuum cleaner.

-Pre-oiled Wooden Surfaces (Interior):

•  Clean the surface with a damp cloth to remove all dust and wait until it dries.

-Old Uncoated Wooden Surfaces (Interior):

• Sand the weathered surface according to the desired surface appearance. It is recommended to sand with sandpaper #120 for a natural texture and #180-220 for a smoother texture.

• Thoroughly clean the generated dust and remove it from the surface with a vacuum cleaner.

• Remove the remaining dust with a damp cloth.

-Varnished Wooden Floors (Interior):

• Do not apply the product directly on pre-coated surfaces.

• Remove the old varnish from the parquet completely with a scraping machine. Remove dirt, oil, wood dust, and old varnish residues from the surface.

• Sand the surface to the desired finish. It is recommended to sand with sandpaper #120 for a natural texture and #180-220 for a smoother texture.

• Clean the generated dust thoroughly and remove it from the surface with a vacuum cleaner.

• Remove the remaining dust with a damp cloth.

•Application:

• The product is ready to use and does not require thinning.

• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.

• For best interior and exterior wood results, apply two coats with a roller or brush, and brush off excess oil.

• For best results on exterior wooden decks, apply one coat with a roller or brush, and brush off excess oil.

• Apply in the direction of the wood grain to get a homogeneous look

• The treated surfaces can be stepped on after 24 hours.

•Maintenance (when the same product had been used before):

• Do not apply the product directly on pre-coated surfaces.

• Clean the wood surface entirely from dirt and oil and perform a slight sanding.

• Thoroughly clean the generated dust.

• Repeat the same process as described in “the Application”.

• Inspect annually and maintain as required.

•Instructions:

• FOR INTERIOR AND EXTERIOR USE.

• Never use any cellulosic, polyurethane, filler, or primer before applying HEMEL Rapid Oil.

• Keep the product closed when not in use.

• The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.

• The moisture content of the wood should max 20%.

• Do not apply the product under direct sunlight or rain. The area should be ventilated during and after the application to promote drying.

• To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.

• Oiled interior floors should not be cleaned with ammonia-containing cleaning materials. • The treated surfaces can be stepped on after 24 hours. Allow seven days before spreading the carpet and cleaning.

• The product should be stored at temperatures between 5°C to 35°C.

• Painting tools should be cleaned with mineral spirits after the application.