Hemel Sauna Oil Clear

Water-based oil specially formulated to nourish and protect the wooden surfaces of saunas and steam rooms.

General Features

One-coat protection

Extends the life of sauna wood by preventing wood splitting

Durable elastic heat-resistant coating

Reduces moisture absorption

Fast drying

Beautiful natural finish

Non-film forming

Water repellent

Child safe (EN 71-3 Certified)

Low-odor, environmentally friendly, and safe

Easy application

Ready to use

Areas of Use

All untreated interior wooden surfaces of sauna steam rooms (benches, panels, flooring, ceilings).

Packaging Sizes

2,5 L.

Interior use only

Apply by Brush or Roller

1 coat
Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

EN71-3 Toy Safety Certificate
Coverage:
- 10-12 m2 for softwoods, 15-18 m2 for hardwoods (varies according to the type of wood and application method)
Surface Preparation:
- Sand the surface with sandpaper #80/120.
- Clean any dirt, oil, and wood dust from the surface.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- Apply the product in 1 coat with a brush or roller and remove the excess oil by brush for the best result.
- Apply in the direction of the wood to get a homogeneous look.
- The treated surfaces may be stepped on after 24 hours.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a light sanding.
- Thoroughly clean the generated dust.
- Repeat the same process as described in Application with 1 or 2 coats depending on weathering.
- Inspect annually and maintain as required.
Instructions:
- FOR INTERIOR USE ONLY.
- Keep product closed when not in use.
- The general application temperature of the product is between 15°C and 25°C at a relative humidity range of 40-65%.
- The moisture content of the wood should be max. 20%.
- Do not apply the product under direct sunlight or rain.
- Do not apply linseed oil, basecoat/primer, or yacht varnish before or after the product applied surfaces.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- After application, painting tools should be cleaned with soap and warm water.
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN
- Do not transfer contents to other containers for storage
- Do not use empty cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin. Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists.
- Call the Poison Control Center, hospital emergency room, or physician if swallowed.
- Dispose of contents/cans per national regulations.
- Please refer to the product's Safety Data Sheet (SDS) for health and safety information.

Features
General Features

One-coat protection

Extends the life of sauna wood by preventing wood splitting

Durable elastic heat-resistant coating

Reduces moisture absorption

Fast drying

Beautiful natural finish

Non-film forming

Water repellent

Child safe (EN 71-3 Certified)

Low-odor, environmentally friendly, and safe

Easy application

Ready to use

Areas of Use

All untreated interior wooden surfaces of sauna steam rooms (benches, panels, flooring, ceilings).

Packaging Sizes

2,5 L.

Interior use only

Apply by Brush or Roller

1 coat

Yorumlar (0)

FAQ
Document

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

EN71-3 Toy Safety Certificate
Application
Coverage:

10-12 m2 for softwoods, 15-18 m2 for hardwoods (varies according to the type of wood and application method)

Surface Preparation:

Sand the surface with sandpaper #80/120.

Clean any dirt, oil, and wood dust from the surface.

Application:

The product is ready to use and does not require thinning.

Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.

Apply the product in 1 coat with a brush or roller and remove the excess oil by brush for the best result.

Apply in the direction of the wood to get a homogeneous look.

The treated surfaces may be stepped on after 24 hours.

Maintenance (when the same product had been used before):

Do not apply the product directly on pre-coated surfaces.

Clean the wood surface completely from dirt and oil and perform a light sanding.

Thoroughly clean the generated dust.

Repeat the same process as described in Application with 1 or 2 coats depending on weathering.

Inspect annually and maintain as required.

Instructions:

FOR INTERIOR USE ONLY.

Keep product closed when not in use.

The general application temperature of the product is between 15°C and 25°C at a relative humidity range of 40-65%.

The moisture content of the wood should be max. 20%.

Do not apply the product under direct sunlight or rain.

Do not apply linseed oil, basecoat/primer, or yacht varnish before or after the product applied surfaces.

The product should be protected from freezing and stored at temperatures between 5°C to 35°C.

After application, painting tools should be cleaned with soap and warm water.
Safety Precautions
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN
- Do not transfer contents to other containers for storage
- Do not use empty cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin. Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists.
- Call the Poison Control Center, hospital emergency room, or physician if swallowed.
- Dispose of contents/cans per national regulations.
- Please refer to the product's Safety Data Sheet (SDS) for health and safety information.
Videos