Hickson Decor Aqua Breather Paint Polar White Semi Gloss

Tips

Application methods and amounts specified in Hickson Decor Aqua Breather Paint Wood Paint Technical Data Sheet should be followed during application.

Care should be taken to perform sanding between coats to improve the final appearance, adhere to each other and get the desired performance from the paint.

Hickson Decor Aqua Breather Paint Wood Paint is ready to use, no thinning is required.

It is very important to apply the product to the heads of the wood for good protection. Thus, water repellency will be given to the head parts that receive the most water.

Make sure the wood has rounded edges. Wood paint does not adhere sufficiently in sharp corners and the film thickness remains weak. The possibility of receiving water from this sharp corner may occur, causing the Hickson Decor Aqua Breather Paint Wood Paint to peel off.

In exterior applications, wooden details have to be designed so that they will not accumulate water on their surface where water will flow significantly. So, it will extend the wood paint's service life.

If it is desired to get maximum service life from exterior applications, at least 1 layer of Hickson Decor Aqua Breather paint should be applied to the back parts of the woods too. In this way, the moisture that the wood can receive from the facade and construction will be kept to a minimum and the operation of the wood will be minimized.

Sanding and painting should always be done in the direction of the veins of the wood.

The wood painting should always be started from the top point of the wood and application should be made in areas of 3-5 square meters. If wood paint is to be interrupted during the application, it should be left at the joints of the woods or the ends and sides of the facade. Otherwise, it will ride floor by floor and have visually bad results. Always brush to the last unpainted area applied, and then return to the painted surface and feed the excess paint.

The performance of the wood increases with regular maintenance. Check your exterior wood every two years to provide ideal protection and maintain it if necessary.

On days when the temperature difference between day and night is high, dew may form on the wooden or painted surface. In this case, the surface should be wiped with a dry cloth, cleared of dew and moisture, and the painting process should be started after the surface is completely dry.

It is highly recommended to apply Hickson Decor Universal Primer before application on hardwoods such as iroko and chestnut containing natural additives such as tannin and rubber. Thus, the yellowing of the final coat of wood paint is prevented in exotic and resinous woods.

It is not recommended to apply Hickson Decor Aqua Breather Paint Wood Paint, especially in summer, when the sun hits steeply at noon. The paint may dry on the surface without sufficient absorption by the wood. In addition, brush movement may be difficult due to quick-drying and brush marks may occur on the surface. To solve this problem, if the wood paint is thinned more than necessary, the performance of the product decreases.

Problems and Solutions

Hickson Decor Aqua Breather Paint, wood paint does not spread on the surface during application and collects in certain areas.

Causes of the Problem:

The presence of silicone or solvent vapor in the environment. For example; The use of silicone products in the environment and lack of sufficient ventilation. (PVC window application, solvent-based paint)

Solution:

• The area where wood paint is applied should be well ventilated, the surface should be cleared of silicone / solvent residue.
• Hickson Decor Aqua Breather Paint Wood Paint has just been applied to the surface and if it is a small area, the paint on the surface should be removed with a clean cloth and the surface should be completely cleaned from the new wood paint.
• If it is not possible to clean the surface, more brushing should be done on the surface.
• If the paint does not spread and collects in certain areas, the problem should be eliminated without allowing the product to dry on the surface.

Hickson Decor Aqua Breather Paint has a different result from the color selected in the color chart.

Causes of the Problem:

Application of Hickson Decor Aqua Breather Paint Wood Paint without sufficient mixing.

Using wood paint less than the amount specified in the user manual.

Solution:

• As the specific gravity of the pigment and the resin that colors Hickson Decor Aqua Breather Paint is different, the pigment sinks to the bottom in time. For this reason, before using the product, it should be mixed very well with the help of a spatula and make sure that there is no undissolved pigment left in the bottom of the box.
• During the application of wood paint, the amount of product applied to the surface should be checked with a wet film meter from time to time and it should be ensured that the amount of product specified in the technical data form of the product is applied.
• If you want to see how the product will look on the surface before the application, you can apply in a small area by requesting a product sample from our authorized dealers or us.

Resin flowing from wood after application

Causes of the Problem:

• This situation is a natural process arising from the structure of the wood. Some types of wood, such as cedar, contain dense resin.

Solution:

• To improve the visuality, the parts where the resin flows can be wiped with cellulosic thinner and retouched after patting sandpaper.

• If resin flow is observed on the surface after the wood paint application; It should be waited for a while for all the resin in the knots and resin pouches to flow and dry on the surface. Afterward, the dried resin should be removed with a spatula and the resin residue on the surface should be wiped off with cellulosic thinner. If necessary, this area can be retouched after the sanding.
• The best time to clean resin is when it is cold. When this application is made in hot weather, the resin can contaminate the surface.

Brush marks on the surface after the application of Hickson Decor Aqua Breather Paint

Causes of the Problem

• The brush on which wood paint is applied is not clean.
• Not using proper brushes
• During the application of wood paint, not scanning (returning to the painted surface and feeding or removing the excess paint)
• Not applying enough product to spread the wood paint on the surface.

Solution:

• To remove the brush marks, the application should be repeated after sanding.

Peeling and flaking of Hickson Decor Aqua Breather Paint Wood Paint from the surface

Causes of the Problem:

• Water intake from the heads of the wood, or from the surface where the product is not applied.
• The moisture content of the treated wood during application is more than 20%.
• Failure to sand the wood as shown at instructions of Hickson Decor Aqua Breather Paint.
• Due to the failure to comply with the consumption proportion specified in the instructions, the wood paint is applied in a small amount to the surface and does not form a sufficient film layer.
• Since the absorption of heat-treated wood (ThermoWood® etc.) is high, the product should be applied at least as 3 coats.

Solution:

• Operations under the title of the Causes of the Problem must be checked and the conditions that cause must be eliminated.
• Peeled and flaked areas should be completely cleaned and sanded. If the wood needs maintenance, the necessary maintenance should be done and the maintenance process should be completed by reapplying wood paint to these surfaces.

Frequently Asked Questions

I applied Hickson Decor Aqua breath Paint wood paint. What's the reason it turned yellow over time?

Depending on the resins used in these types of products, a certain amount of yellowing is accepted within the standards. Also, if you are using a tree type with a high content of tannin and rubber, you can avoid this extra yellowing by using Hickson Decor Aqua Universal Primer before applying the product to prevent yellowing caused by the tree.

What is the brightness of Hickson Decor Aqua Breather Paint wood paint?

Hickson Decor Aqua breath Paint wood paint has two different gloss options: Matte and glossy.

Can Hickson Decor Aqua Breather Paint be applied on wood paint paste?

Hickson Decor Aqua Breather Paint it is recommended to use Hemel acrylic sealant, whose compatibility with wood paint has been tested. Steel paste should not be used in any way.

Will Solvent-based Hickson Decor Breather Paint be brighter than water-based Hickson Decor Aqua Breather Paint?

Solvent-based Hickson Decor Breather Paint will provide a brighter appearance as it creates a slightly more film thickness on the surface.

How should it be applied with a brush?

You can apply by dipping the brush into the wood paint about one third and leaving the required amount of product in the direction of the wood grain. So you get a homogeneous image.

How to choose a brush?

Quality brushes made of soft-tipped natural bristles and that do not leave bristles should be preferred.

What is breathable wood paint and why is it important?

Breathable wood paints are products that form a water-proof but water vapor-permeable paint layer on the painted surface. These can also be defined as microporous wood paints with high water vapor permeability. A small crack that may occur on the surface as a result of working or receiving a small impact due to precipitation and changes in humidity in the air may cause the wood to become wet. Drying of this water, which soaks the wood under the paint layer, is very important for the life of the wood paint and wood. If the wood is wet for a long time, it causes both the paint to fall off and the wood to rot. Breathing wood paints prevent this situation. It also penetrates the wood well and has the flexibility to work with the wood.

Can I apply it with a roller?

If Hickson Decor Aqua Universal Primer is used on the surface, it can be applied with a roller. Otherwise, the first coat must be applied with a brush for the wood paint to penetrate the wood well and to prepare a homogeneous first coat. Other layers can be applied with a roller to provide sufficient film thickness.

What does NCS and RAL chart mean?

They are color charts used in the international paint industry. NCS: Natural Color System used as an abbreviation of the English Natural Color System. The NCS chart references 4 saturated basic colors (yellow, red, blue, green) based on the perception of colors by the human eye. RAL: It is a standardized color system that has been used in the industry since the 1920s.

Can I dilute it with water? How thin should I thin?

Hickson Decor Aqua Breather Paint Wood Paint is ready to use and does not require thinning. In very hot weather, it can be diluted 10% with drinking water. When thinning, problems such as service life, quality, and color tone may be encountered.

What is the difference with solvent-based?

Water-based products are more natural and matte than solvent-based products. Drying time is shorter and odorless compared to solvent-based products. There is no difference in service life and quality.

Can Hickson Decor Aqua Breather Paint be applied on another paint brand?

Hickson Decor Aqua Breather Paint Wood Paint should not be applied directly to old painted surfaces. The old paint should be completely removed from the surface with sandpaper, and then Hickson Decor Breather Paint should be applied.

I applied without sanding the wood, will I have a problem?

Before applying paint to the wooden surface, it should be sanded to adhere to Hickson Decor Aqua Breather Paint Wood Paint and to work into the wood in the best way. Application without sanding will result in peeling, flaking of wood paint, not meeting its service life, and not getting full performance from the paint.

What happens if I don't sand between coats?

The new coat to be applied will not stick to the previous layer. As a result, Hickson Decor Aqua Breather Paint begins to peel off after a while. Also, you cannot get a homogeneous appearance on the surface.

Can I apply this product directly on a surface previously applied with Hickson Decor Breather Paint solvent-based wood paint?

Yes, you can. You can apply 1 or 2 coats by sanding the painted surface with 180-220 grade sandpaper.

Are there different gloss options of Hickson Decor Aqua Breather Paint Wood Paint?

Hickson Decor Aqua Breather Paint has two different gloss options as glossy (HG) and matte (SG).

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty plastic cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/plastic cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Wood paint

What is wood paint, how is it applied, and how is it painted with other colors are the first questions that come to mind?  The answer to the question of how to paint the wood that is assumed as a hobby can be shown as "The process of making worn wooden objects and untouched raw materials reusable with paint and different materials." The price of wood paint varies according to the type of wood, whether it is water-based or solvent-based, and whether it is in the spray wood paint category.

To get the most efficiency from the areas where wood is desired to be painted, it is essential to choose the appropriate paint according to the relevant surface.

Painting wood furniture and surfaces with paint types suitable for the relevant building material can be done for decorative and hobby purposes. Water-based opaque wood paints have protective properties for wood care on exterior facades. In addition to artistic wooden hobby products, the ability of painting wood furniture and walls easily also speeds up the hands of masters. When using wood paint, it is necessary to make preparations regardless of the surface during or before application and pay attention to essential and critical tips. Thus, the highest efficiency can be obtained from the painting process of wood. There are interior wood paints and exterior wood paints.

Grey wood paint and white wood paint are some of the most popular colors as they give a fresh and stylish look where they are applied.

White wood paint is preferred for doors, window joinery, shutters, cladding, and fences. Combining it with grey wood paint would be much more stylish.

Why will you want to paint your wood floors?

The single most important reason we consider painting wood floors is to increase their lifetime. When hardwood floors are 100 years or older and refinishing is not an option, painting is a terrific option. It is also a less expensive and time-consuming option to replacing flooring. Furthermore, leaving the floors in place results in less waste in the landfill. There are wood floor paints of high quality to paint the wood floor.

What is a wood primer, and how is it used?

Wood, as an organic component, tends to absorb paint applied to the surface. The absorption of the paint is a factor that increases or decreases the quality of the finished product. Wood primers are evaluated within the scope of surface preparation coatings before paint application to the surface. The primer's primary function on wood is that it helps to be applied easily without the use of various paints for different wooden surfaces. With its versatile use and application capabilities, an extremely high-quality finish and a smooth surface are obtained using only the same type of paint and primer, without the need for a wide product range.

Exterior Wood paint / outdoor wood paint brands vary according to wood paint prices and other factors. Color is one of the main factors affecting wood paint prices. Our answer to the question of the best quality wood paint will be Hemel exterior wood paint. It is also essential for organic wood paint prices to know whether the paint is colored, where it is sold, and whether it is surface paint.