HEMEL PRO MX 4000 PRIMER

Coverage:

• 1 L. covers 5-7 m² with two coats

Surface Preparation:

New Wooden Surfaces:

• Remove any dirt, oil, and wood dust from the surface.
• Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.

Coated Wooden Surfaces:

• Remove the old paint/varnish from the surface thoroughly with sandpaper.
• Remove the remaining dust with a damp cloth. Do not apply the product on pre-coated surfaces.

Application:

• The product is ready to use and does not require thinning. (At very high temperatures, 2-3% drinking water may be added).
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply the product in 2 coats by a spray gun (2,5-3 mm nozzle, min. 3 atm pressure), wait 1,5-2 hours, and perform a slight sanding with sandpaper #180-400 between coats.
• If a smooth surface is desired, sand the surface thoroughly with sandpaper #180-400 by waiting 24 hours before applying the second coat.
• Wait 24 hours for complete dry.
• The area should be ventilated during and after the application to promote drying.
  

Instructions:

• FOR INTERIOR USE ONLY.
• Different results can be obtained depending on the quality of the MDF, and it is recommended to try it on a small area before use.
• Keep the product closed when not in use.
• The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
• The moisture content of the wood should max at 12%.
• The area should be ventilated during and after the application to promote drying.
• The product should be stored at temperatures between 5°C to 35°C.
• After application, painting tools should be cleaned with soap and plenty of warm water.

USE IN A WELL VENTILATED AREA.
KEEP OUT OF THE REACH OF CHILDREN.
Store the product in its original packaging.
Do not use the empty container in another process.
Provide necessary ventilation by keeping windows and doors open during or after application to avoid exposure to possible product vapor.
Avoid contact with eyes and skin.
Wash your hands after use.
FIRST AID: In case of contact with eyes, rinse thoroughly with plenty of water. If irritation persists, seek medical attention.
If swallowed call the National Poison Information Center on 114 or a doctor/physician.
Dispose of contents/container in accordance with national regulations.
Read the product's Safety Data Sheet (SDS) for health and safety information.