HEMEL PRO MX 3030

Coverage:

• 1 L. covers 10-12 m² with one coat

Surface Preparation:

New Wooden Surfaces:

• Remove any dirt, oil, and wood dust from the surface.
• Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.

Coated Wooden Surfaces:

• Do not apply the product on pre-coated surfaces.
• Remove the old paint/varnish from the surface completely with sandpaper.
• Remove the remaining dust with a damp cloth.

Application:

• The product is ready to use and does not require thinning. (At very high temperatures 5% drinking water may be added).
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply the 1st coat with a brush or roller and leave it to dry for 2 hours.
• Perform a slight sanding with sandpaper #180/220 before applying the 2nd coat.
• Apply the product in 2 or 3 coats by a spray gun (2,5-3 mm nozzle, min. 3 atm pressure) and wait 1,5-2 hours and perform a slight sanding with sandpaper #180/220 between coats.
• If a smooth surface is desired sand the surface thoroughly with 180-400 no. Sandpaper by waiting 24 hours before applying the final coat.
• Wait 24 hours for complete dry.

Instructions:

• FOR INTERIOR USE ONLY.
• Wait 72 hours before packaging coated/finished goods. 
• Keep the product closed when not in use.
• The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
• The moisture content of the wood should max 12%.
• The area should be ventilated during and after the application to promote drying.
• The product should be stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty plastic cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/plastic cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.