This product cannot be shipped to your region
HEMEL

Hemel Pro Wood Dye SA 1119 White

Water-based wood dye
Campaign
  • Features
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • Genel Özellikler
    • Verniksiz doğal görünüm
    • Fırça/bez/daldırma ile uygulama
    • Çevre dostu
    • Doku gösteren yarı şeffaf
    • Ağır metal ve kurşun içermez
    • Kullanıma hazır
    Kullanım Alanları
    • Tüm iç/dış mekan ahşapları
    • Kapı ve pencere doğramaları
    • Panjurlar
    • Cephe kaplamaları
    • Çitler
    • Pergolalar
    • Balkon korkulukları
    • Masif veya parke zeminler
    • Lambri
    • Ahşap tavanlar
    Ambalaj Boyutları
    • 1 L.
    • 2,5 L.
    • 5 L.
    • 15 L. (Sipariş bazında üretilir)
    İç/Dış Mekan İçindir
    Fırça,bez veya daldırma ile uygulanır
    Önce Karıştırınız
    1 Lt ile 10-12 m2
    Kabarma Yapmaz



    Önemli Not:
    Yukarıda gösterilen renkler çam üzerine uygulanmış olup gerçeğe yakın olmasına özen gösterilmiştir. Elde edeceğiniz renk ve parlaklık, ahşabın özelliklerine, dokusuna emiciliğine ve ekran ayarlarına göre değişiklik gösterecektir. Ayrıca, boyanın ne kalınlıkta ve kaç kat sürüldüğü de sonucu etkileyecektir. Gerçek rengi görebilmek için, kullanılacak ahşap üzerinde denenmesi önerilir.

  • •Coverage:

    • 1 L. covers 10-12 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by brush, cloth, or dipping and wait 4-6 hours for completely dry.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • For interior use decorative finish, apply Hemel or Prime Parquet Varnishes or Prime MX 3030 as a top coat.
    • Apply Hemel Pro SC, TX, and VA series as a topcoat for exterior use, UV protection, and decorative finish.

    •Maintenance (when the same product had been used before):

    • Do not apply the product on pre-coated surfaces.
    • Remove the old stain/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in "Application".
    • Inspect annually and maintain as required.

    •Instructions:

    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20% for exterior use.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, or yacht varnish before or after the product is applied to surfaces.
    • To provide long-life protection against decay, apply Prime Wood Preserver on untreated softwoods and wait 24 hours before applying the product.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • After application, painting tools should be cleaned with soap and plenty of warm water.
  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows, and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the product's Safety Data Sheet (SDS) for health and safety information.
  • There are many wood coloring products for interior and exterior use. Since wood is a natural material and must be protected well, the wood dye and colorants to be used should be selected well. So, what should we pay attention to when choosing wood coloring? Where can we use wood colorants? What are the wood coloring products that can be used in home or industrial areas? We have prepared a small article about these.

    As in every field, wood colorant products that are safe for human health and environmentally friendly do not contain heavy metals, and lead should be preferred. They must be water-based and conform to the Toy Safety Standard. In this way, you can safely color many areas of your home, balcony railings, etc., while protecting your health and nature.

    Another essential point of the wood colorant is the rich color pigments in its content. It would help if you were careful that the product you will use contains high color pigments. In this way, you will maintain the natural appearance of your wood and provide good coloring. In addition, a translucent colorant brings out the wood texture and natural beauty of the wood.

    Where are water-based wood colorants used?

    You can use wood colorants on all interior/exterior wood, such as door and window joinery, shutters, facade cladding, fences, pergolas, balcony railings, roof eaves, solid or laminated parquet floors, paneling, and wooden ceilings.

    How is Water-Based Wood Coloring applied?

    Hickson Decor Aqua DecorativeWood Colorants produced by Hemel are ready to use, do not require thinning, and can be applied by brush, cloth, and dipping methods.

    Tips for coloring wood

    When the wood colorant product is applied with a brush, it should be combed along the grain of the colorant wood on the surface to obtain a homogeneous appearance and avoid the risk of overlapping. In addition, to avoid any brush marks when applying wood colorant, the excess should be wiped off with a cloth after the product is applied before allowing the color to dry. Therefore, the application should continue in small areas.

    Drinking water can be added in a 2% to 3% ratio to delay drying on large surfaces in sweltering weather and prevent possible brush traces.

    In exterior applications, designing wooden details so that they do not accumulate on the surface where water will flow significantly increases their service life.

    Can I get different colors with wood colorant types?

    You can mix different colors of the same product to obtain different colors other than the standard colors of wood colorant, and you can prepare your custom color.

    Change the wood floor color with water-based wood colorants

    You can apply HEMEL Pro HD or SA Wood Series' desired color by completely removing varnish on the surface and colorant, if any, with a scraper. You can complete the change by applying Hemel water-based wood floor varnishes to it. Click for wood floor coloring prices and wood floor varnishes!

  • Features
    Genel Özellikler
    • Verniksiz doğal görünüm
    • Fırça/bez/daldırma ile uygulama
    • Çevre dostu
    • Doku gösteren yarı şeffaf
    • Ağır metal ve kurşun içermez
    • Kullanıma hazır
    Kullanım Alanları
    • Tüm iç/dış mekan ahşapları
    • Kapı ve pencere doğramaları
    • Panjurlar
    • Cephe kaplamaları
    • Çitler
    • Pergolalar
    • Balkon korkulukları
    • Masif veya parke zeminler
    • Lambri
    • Ahşap tavanlar
    Ambalaj Boyutları
    • 1 L.
    • 2,5 L.
    • 5 L.
    • 15 L. (Sipariş bazında üretilir)
    İç/Dış Mekan İçindir
    Fırça,bez veya daldırma ile uygulanır
    Önce Karıştırınız
    1 Lt ile 10-12 m2
    Kabarma Yapmaz



    Önemli Not:
    Yukarıda gösterilen renkler çam üzerine uygulanmış olup gerçeğe yakın olmasına özen gösterilmiştir. Elde edeceğiniz renk ve parlaklık, ahşabın özelliklerine, dokusuna emiciliğine ve ekran ayarlarına göre değişiklik gösterecektir. Ayrıca, boyanın ne kalınlıkta ve kaç kat sürüldüğü de sonucu etkileyecektir. Gerçek rengi görebilmek için, kullanılacak ahşap üzerinde denenmesi önerilir.

  • Yorumlar (0)
  • FAQ
  • Document
  • Application

    •Coverage:

    • 1 L. covers 10-12 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by brush, cloth, or dipping and wait 4-6 hours for completely dry.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • For interior use decorative finish, apply Hemel or Prime Parquet Varnishes or Prime MX 3030 as a top coat.
    • Apply Hemel Pro SC, TX, and VA series as a topcoat for exterior use, UV protection, and decorative finish.

    •Maintenance (when the same product had been used before):

    • Do not apply the product on pre-coated surfaces.
    • Remove the old stain/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in "Application".
    • Inspect annually and maintain as required.

    •Instructions:

    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20% for exterior use.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, or yacht varnish before or after the product is applied to surfaces.
    • To provide long-life protection against decay, apply Prime Wood Preserver on untreated softwoods and wait 24 hours before applying the product.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • After application, painting tools should be cleaned with soap and plenty of warm water.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows, and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the product's Safety Data Sheet (SDS) for health and safety information.
  • Videos
  • Öneri Kutusu
Prepared by  T-Soft E-Commerce.