This product cannot be shipped to your region
PAINT CALCULATOR
FIND APPLICATOR
HEMEL

PRO BA SERIES BA 2119

Water-based industrial exterior white primer
Campaign
  • Features
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Promotes topcoat adhesion
    • Allows wood to breathe
    • Elastic
    • Thixotropic (can be applied vertically)
    • High filling power
    • Child safe (EN 71-3 Certified)
    • Environmentally friendly
    • Ready to use
    Where to use
    • Suitable for all exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    • Restorations
    Packaging

    • 15 L. (19,35 Kg)
    Exterior use only
    Not to be applied on decks/floors.
    tabanca.svg (6 KB)
    Apply with a spray gun
    Stir well before use
    1 Lt covers 10 m2

  • PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) EN71-3 Toy Safety Certificate

  • Coverage:

    1 L. covers 10 m²


    Surface Preparation:

    Remove any dirt, oil, and wood dust from the surface.


    New Wood Surfaces:

    Sand the surface with sandpaper #80/120.
    Thoroughly clean the generated dust.


    Old Uncoated Wood Surfaces:

    Sand the weathered surface with sandpaper #80/120.
    Thoroughly clean the generated dust.


    Coated Wood Surfaces:

    Do not apply the product directly on pre-coated surfaces.
    Remove the old paint/varnish from the surface completely with sandpaper.
    Thoroughly clean the generated dust.


    Application:

    The product is ready to use and does not require thinning. (Can be diluted up to 5% with drinking water to improve levelling in low temperatures).
    Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    Apply the product in 1 coat by airless or air-mix spray gun and wait 1,5-2 hours for before applying the topcoat
    Apply HEMEL Acrylic Filling Paste on nailheads, joint points, capillary cracks, and depths below 3 mm.
    Perform a slight sanding with sandpaper #180/220 and apply Hickson Decor® Aqua Industrial Opaque Paint (PA series)

    Instructions:

    FOR EXTERIOR USE ONLY.
    NOT SUITABLE FOR FLOORINGS.
    Keep the product closed when not in use.
    The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    The moisture content of the wood should max at 20%.
    Do not apply the product under direct sunlight or rain.
    Do not apply linseed oil, basecoat/primer, or yacht varnish before or after product-coated surfaces.
    To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
    The product should be stored at temperatures between 5°C to 35°C.
    After application, painting tools should be cleaned with soap and plenty of warm water.

  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Features
    General Features
    • Promotes topcoat adhesion
    • Allows wood to breathe
    • Elastic
    • Thixotropic (can be applied vertically)
    • High filling power
    • Child safe (EN 71-3 Certified)
    • Environmentally friendly
    • Ready to use
    Where to use
    • Suitable for all exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    • Restorations
    Packaging

    • 15 L. (19,35 Kg)
    Exterior use only
    Not to be applied on decks/floors.
    tabanca.svg (6 KB)
    Apply with a spray gun
    Stir well before use
    1 Lt covers 10 m2
    • Yorumlar (0)
  • FAQ
  • Document

    PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) EN71-3 Toy Safety Certificate
  • Application

    Coverage:

    1 L. covers 10 m²


    Surface Preparation:

    Remove any dirt, oil, and wood dust from the surface.


    New Wood Surfaces:

    Sand the surface with sandpaper #80/120.
    Thoroughly clean the generated dust.


    Old Uncoated Wood Surfaces:

    Sand the weathered surface with sandpaper #80/120.
    Thoroughly clean the generated dust.


    Coated Wood Surfaces:

    Do not apply the product directly on pre-coated surfaces.
    Remove the old paint/varnish from the surface completely with sandpaper.
    Thoroughly clean the generated dust.


    Application:

    The product is ready to use and does not require thinning. (Can be diluted up to 5% with drinking water to improve levelling in low temperatures).
    Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    Apply the product in 1 coat by airless or air-mix spray gun and wait 1,5-2 hours for before applying the topcoat
    Apply HEMEL Acrylic Filling Paste on nailheads, joint points, capillary cracks, and depths below 3 mm.
    Perform a slight sanding with sandpaper #180/220 and apply Hickson Decor® Aqua Industrial Opaque Paint (PA series)

    Instructions:

    FOR EXTERIOR USE ONLY.
    NOT SUITABLE FOR FLOORINGS.
    Keep the product closed when not in use.
    The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    The moisture content of the wood should max at 20%.
    Do not apply the product under direct sunlight or rain.
    Do not apply linseed oil, basecoat/primer, or yacht varnish before or after product-coated surfaces.
    To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
    The product should be stored at temperatures between 5°C to 35°C.
    After application, painting tools should be cleaned with soap and plenty of warm water.

  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
    • Öneri Kutusu
Prepared by  T-Soft E-Commerce.