Turkish
Русский
Français
Español
SHARE
-
General Features
- Ready-to-use, easy to apply
- Fine-grained texture provides smooth surface
- Shrink and crack resistant
- Fast drying
- Easy to sand, leaves a smooth finish
- Accepts paint and varnish applications
- High filling capacity
- VOC-free
Areas of Use- Interior furniture production
- Doors, windows and joinery
- Wooden panels, claddings, and wallboards
- Nail holes, knots, and crack repairs
- Restoration works
Packaging Sizes- 200 g tube
Interior use only
Apply by spatula
1 coat (2 or 3 coats for deep cracks) -
Coverage:
- 1 L. covers 6-7 m² with two coats
Surface Preparation:
- Remove any dirt, oil, and wood dust from the surface.
New Wood Surfaces:
- Surface must be dry, clean, and free of oil/dust.
- For new wood surfaces: sand with 80/120 grit sandpaper and remove dust.
Old Uncoated Wood Surfaces:
- For old unpainted/unvarnished wood: prepare the surface smoothly.
- For painted/varnished surfaces: completely remove existing coatings by sanding.
Coated Wood Surfaces:
- Do not apply the product directly on pre-coated surfaces.
- Remove the old paint/varnish from the surface completely with sandpaper.
- Thoroughly clean the generated dust.
Application:
- Product is ready-to-use, no dilution required.
- Apply into cracks, gaps, and defects with a spatula.
- For deep gaps, apply several thin layers instead of a single thick layer, allowing each coat to dry.
- After full drying, sand the surface and apply paint or varnish if desired.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a light sanding.
- Thoroughly clean the generated dust.
- Repeat the same process as described in Application with 1 or 2 coats depending on weathering.
- Inspect annually and maintain as required.
Instructions:
- FOR EXTERIOR USE ONLY.
- Not suitable for flooring applications.
- Close the lid tightly after use.
- Application temperature: 10–25°C, relative humidity: 40–65%.
- Moisture content of wood should be below 20%.
- Do not apply under direct sunlight or in humid/rainy environments.
- Store between 5–30°C, protect from frost.
- Clean tools with water after application.
-
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
-
FeaturesGeneral Features
- Ready-to-use, easy to apply
- Fine-grained texture provides smooth surface
- Shrink and crack resistant
- Fast drying
- Easy to sand, leaves a smooth finish
- Accepts paint and varnish applications
- High filling capacity
- VOC-free
Areas of Use- Interior furniture production
- Doors, windows and joinery
- Wooden panels, claddings, and wallboards
- Nail holes, knots, and crack repairs
- Restoration works
Packaging Sizes- 200 g tube
Interior use onlyApply by spatula1 coat (2 or 3 coats for deep cracks) -
FAQ
-
Document
-
ApplicationCoverage:
- 1 L. covers 6-7 m² with two coats
Surface Preparation:
- Remove any dirt, oil, and wood dust from the surface.
New Wood Surfaces:
- Surface must be dry, clean, and free of oil/dust.
- For new wood surfaces: sand with 80/120 grit sandpaper and remove dust.
Old Uncoated Wood Surfaces:
- For old unpainted/unvarnished wood: prepare the surface smoothly.
- For painted/varnished surfaces: completely remove existing coatings by sanding.
Coated Wood Surfaces:
- Do not apply the product directly on pre-coated surfaces.
- Remove the old paint/varnish from the surface completely with sandpaper.
- Thoroughly clean the generated dust.
Application:
- Product is ready-to-use, no dilution required.
- Apply into cracks, gaps, and defects with a spatula.
- For deep gaps, apply several thin layers instead of a single thick layer, allowing each coat to dry.
- After full drying, sand the surface and apply paint or varnish if desired.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a light sanding.
- Thoroughly clean the generated dust.
- Repeat the same process as described in Application with 1 or 2 coats depending on weathering.
- Inspect annually and maintain as required.
Instructions:
- FOR EXTERIOR USE ONLY.
- Not suitable for flooring applications.
- Close the lid tightly after use.
- Application temperature: 10–25°C, relative humidity: 40–65%.
- Moisture content of wood should be below 20%.
- Do not apply under direct sunlight or in humid/rainy environments.
- Store between 5–30°C, protect from frost.
- Clean tools with water after application.
-
Safety Precautions
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
-
Videos
Yorumlar (0)
Öneri Kutusu
You May Also Like
