Hemel Ultrafill 500 Interior Paste Walnut (507)

Water-based, ready-to-use interior wood repair and filler paste.

General Features

Ready-to-use, easy to apply

Fine-grained texture provides smooth surface

Shrink and crack resistant

Fast drying

Easy to sand, leaves a smooth finish

Accepts paint and varnish applications

High filling capacity

VOC-free

Areas of Use

Interior furniture production

Doors, windows and joinery

Wooden panels, claddings, and wallboards

Nail holes, knots, and crack repairs

Restoration works

Packaging Sizes

200 g tube

Interior use only

Apply by spatula

1 coat (2 or 3 coats for deep cracks)
Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

EN71-3 Toy Safety Certificate
Coverage:
- 1 L. covers 6-7 m² with two coats
Surface Preparation:
- Remove any dirt, oil, and wood dust from the surface.
New Wood Surfaces:
- Surface must be dry, clean, and free of oil/dust.
- For new wood surfaces: sand with 80/120 grit sandpaper and remove dust.
Old Uncoated Wood Surfaces:
- For old unpainted/unvarnished wood: prepare the surface smoothly.
- For painted/varnished surfaces: completely remove existing coatings by sanding.
Coated Wood Surfaces:
- Do not apply the product directly on pre-coated surfaces.
- Remove the old paint/varnish from the surface completely with sandpaper.
- Thoroughly clean the generated dust.
Application:
- Product is ready-to-use, no dilution required.
- Apply into cracks, gaps, and defects with a spatula.
- For deep gaps, apply several thin layers instead of a single thick layer, allowing each coat to dry.
- After full drying, sand the surface and apply paint or varnish if desired.
Maintenance (when the same product had been used before):
- Do not apply the product directly on pre-coated surfaces.
- Clean the wood surface completely from dirt and oil and perform a light sanding.
- Thoroughly clean the generated dust.
- Repeat the same process as described in Application with 1 or 2 coats depending on weathering.
- Inspect annually and maintain as required.
Instructions:
- FOR EXTERIOR USE ONLY.
- Not suitable for flooring applications.
- Close the lid tightly after use.
- Application temperature: 10–25°C, relative humidity: 40–65%.
- Moisture content of wood should be below 20%.
- Do not apply under direct sunlight or in humid/rainy environments.
- Store between 5–30°C, protect from frost.
- Clean tools with water after application.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Features
General Features

Ready-to-use, easy to apply

Fine-grained texture provides smooth surface

Shrink and crack resistant

Fast drying

Easy to sand, leaves a smooth finish

Accepts paint and varnish applications

High filling capacity

VOC-free

Areas of Use

Interior furniture production

Doors, windows and joinery

Wooden panels, claddings, and wallboards

Nail holes, knots, and crack repairs

Restoration works

Packaging Sizes

200 g tube

Interior use only

Apply by spatula

1 coat (2 or 3 coats for deep cracks)

Yorumlar (0)

FAQ
Document

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

EN71-3 Toy Safety Certificate
Application
Coverage:

1 L. covers 6-7 m² with two coats

Surface Preparation:

Remove any dirt, oil, and wood dust from the surface.

New Wood Surfaces:

Surface must be dry, clean, and free of oil/dust.

For new wood surfaces: sand with 80/120 grit sandpaper and remove dust.

Old Uncoated Wood Surfaces:

For old unpainted/unvarnished wood: prepare the surface smoothly.

For painted/varnished surfaces: completely remove existing coatings by sanding.

Coated Wood Surfaces:

Do not apply the product directly on pre-coated surfaces.

Remove the old paint/varnish from the surface completely with sandpaper.

Thoroughly clean the generated dust.

Application:

Product is ready-to-use, no dilution required.

Apply into cracks, gaps, and defects with a spatula.

For deep gaps, apply several thin layers instead of a single thick layer, allowing each coat to dry.

After full drying, sand the surface and apply paint or varnish if desired.

Maintenance (when the same product had been used before):

Do not apply the product directly on pre-coated surfaces.

Clean the wood surface completely from dirt and oil and perform a light sanding.

Thoroughly clean the generated dust.

Repeat the same process as described in Application with 1 or 2 coats depending on weathering.

Inspect annually and maintain as required.

Instructions:

FOR EXTERIOR USE ONLY.

Not suitable for flooring applications.

Close the lid tightly after use.

Application temperature: 10–25°C, relative humidity: 40–65%.

Moisture content of wood should be below 20%.

Do not apply under direct sunlight or in humid/rainy environments.

Store between 5–30°C, protect from frost.

Clean tools with water after application.
Safety Precautions
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
Videos