Hemel PRO PA 1119

Water-based opaque exterior wood finish that allows wood to breathe

General Features

High hiding power

Allows wood to breathe

Elastic

Does not crack, peel or blister

Thixotropic (can be applied vertically)

High filling power

Child safe (EN 71-3 Certified)

Water repellent

Fast stacking

Environmentally friendly

Ready to use

Where to use

Suitable for all exterior wood except floors

Doors and window joinery

Shutters

Claddings

Fences

Pergolas

Balcony railings

Roof fringes

Restorations

Packaging

Clear: 15 L. (15,60 Kg)

Clear Base: 13,5 L. (14,04 Kg)

Polar White: 15 L. (17,55 Kg)

White Base: 14,25 L. (16,67Kg)

Exterior use only

Not to be applied on decks/floors.

Apply with a spray gun

Stir well before use

1 Lt covers 10 m2
Safety Data Sheet White Base (SDS)

Technical Data Sheet (TDS)

EN71-3 Toy Safety Certificate
Coverage:

1 L. covers 10 m²

Surface Preparation:

Remove any dirt, oil, and wood dust from the surface.

New Wood Surfaces:

Sand the surface with sandpaper #80/120.
Thoroughly clean the generated dust.

Old Uncoated Wood Surfaces:

Sand the weathered surface with sandpaper #80/120.
Thoroughly clean the generated dust.

Coated Wood Surfaces:

Do not apply the product directly on pre-coated surfaces.
Remove the old paint/varnish from the surface completely with sandpaper.
Thoroughly clean the generated dust.

The application of Hickson Decor® Aqua Industrial Opaque Paint (PA Series) is recommended before Hickson Decor® Aqua Industrial Opaque Paint, having the function of a barrier of the last coat stain particularly at exotic and resin containing woods. If not, the surface of wood containing resins and natural oils should be cleaned with a cloth soaked in cellulosic thinner and dried out before the application

Application:

The product is ready to use and does not require thinning. (Can be diluted up to 5% with drinking water to improve leveling in low temperatures).
Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
Apply the product with an airless or air mix spray gun in 1 or 2 coats if applied on the primer or in 2 coats if applied directly on the wood.
Wait 1.5-2 hours between coats and perform a slight sanding with sandpaper #180/220 between coats.
Wait 16 hours for the complete dry.

Instructions:

FOR EXTERIOR USE ONLY.
NOT SUITABLE FOR FLOORINGS.
Keep the product closed when not in use.
The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
The moisture content of the wood should max at 20%.
Do not apply the product under direct sunlight or rain.
Do not apply linseed oil, basecoat/primer, or yacht varnish before or after product-coated surfaces.
To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
The product should be stored at temperatures between 5°C to 35°C.
After application, painting tools should be cleaned with soap and plenty of warm water.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Features
General Features

High hiding power

Allows wood to breathe

Elastic

Does not crack, peel or blister

Thixotropic (can be applied vertically)

High filling power

Child safe (EN 71-3 Certified)

Water repellent

Fast stacking

Environmentally friendly

Ready to use

Where to use

Suitable for all exterior wood except floors

Doors and window joinery

Shutters

Claddings

Fences

Pergolas

Balcony railings

Roof fringes

Restorations

Packaging

Clear: 15 L. (15,60 Kg)

Clear Base: 13,5 L. (14,04 Kg)

Polar White: 15 L. (17,55 Kg)

White Base: 14,25 L. (16,67Kg)

Exterior use only

Not to be applied on decks/floors.

Apply with a spray gun

Stir well before use

1 Lt covers 10 m2

Yorumlar (0)

FAQ
Document

Safety Data Sheet White Base (SDS)

Technical Data Sheet (TDS)

EN71-3 Toy Safety Certificate
Application

Coverage:

1 L. covers 10 m²

Surface Preparation:

Remove any dirt, oil, and wood dust from the surface.

New Wood Surfaces:

Sand the surface with sandpaper #80/120.
Thoroughly clean the generated dust.

Old Uncoated Wood Surfaces:

Sand the weathered surface with sandpaper #80/120.
Thoroughly clean the generated dust.

Coated Wood Surfaces:

Do not apply the product directly on pre-coated surfaces.
Remove the old paint/varnish from the surface completely with sandpaper.
Thoroughly clean the generated dust.

The application of Hickson Decor® Aqua Industrial Opaque Paint (PA Series) is recommended before Hickson Decor® Aqua Industrial Opaque Paint, having the function of a barrier of the last coat stain particularly at exotic and resin containing woods. If not, the surface of wood containing resins and natural oils should be cleaned with a cloth soaked in cellulosic thinner and dried out before the application

Application:

The product is ready to use and does not require thinning. (Can be diluted up to 5% with drinking water to improve leveling in low temperatures).
Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
Apply the product with an airless or air mix spray gun in 1 or 2 coats if applied on the primer or in 2 coats if applied directly on the wood.
Wait 1.5-2 hours between coats and perform a slight sanding with sandpaper #180/220 between coats.
Wait 16 hours for the complete dry.

Instructions:

FOR EXTERIOR USE ONLY.
NOT SUITABLE FOR FLOORINGS.
Keep the product closed when not in use.
The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
The moisture content of the wood should max at 20%.
Do not apply the product under direct sunlight or rain.
Do not apply linseed oil, basecoat/primer, or yacht varnish before or after product-coated surfaces.
To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying the product.
The product should be stored at temperatures between 5°C to 35°C.
After application, painting tools should be cleaned with soap and plenty of warm water.
Safety Precautions
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
Videos