HEMEL PRO MX 4060 WHITE

Coverage:

• 1 L. covers 10-12 m² with 1 coat

Surface Preparation:

New Wood Surfaces:

• Remove any dirt, oil and wood dust from the surface.
• Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.
  

Coated Wood Surfaces:

• Do not apply the product on pre-coated surfaces.
• Remove the old paint/varnish from the surface completely with a sandpaper.
• Remove the remaining dust with a damp cloth.

Application:

• The product is ready to use and does not require thinning. If needed, may be diluted up to 5% with drinking water.
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply the product in 2 or 3 coats by spray gun (2.5-3 mm nozzle, min. 3 atm pressure) and wait 1.5-2 hours and perform a slight sanding with sandpaper #180/220 between coats.
• If a smooth surface is desired sand the surface thoroughly with 180-400 no. Sandpaper by waiting 24 hours before applying the final coat.
• Wait 24 hours for complete dry.
  

Instructions:

• FOR INTERIOR USE ONLY.
• Wait 72 hours before packaging coated/finished goods.
• Keep product closed when not in use.
• The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
• The moisture content of the wood should be below 12%.
• The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.